Votos - 3, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 2.13 mb Nombre del archivo: Idioma del manual:

4 Press the ( arrow) button to select the Picture Scroll field. 5 Press the ( / arrow) buttons to scroll the picture up and down as needed. Using the TV’s features Using the TV’s features Using the Auto Aspect feature 6 To save the new settings, highlight Done, and then press the ENTER button. To revert to the factory defaults, highlight Reset and then press the ENTER button. The adjustment range is from -5 to +10. Using the Auto Aspect feature When this feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: . A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input . A 480i signal from the ColorStream HD or Video input . 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1 or HDMI 2 input. Aspect Ratio of Signal Source Automatic Aspect Size (automatically selected when Auto Aspect is On) 4:3 Normal 4:3 4:3 Letter Box TheaterWide 2 16:9 Full Full Not defined (no ID-1 data or The current picture size you selected, see “Selecting HDMI® aspect data) the picture size” on page 64. NOTE The auto aspect ratio feature is not applicable to the PC input. To turn on the auto aspect ratio feature: 1 Press the MENU button and open the Picture menu. 2 Highlight Theater Settings, and then press the ENTER button. 3 In the Auto Aspect Ratio field, select On. 4 To save the new settings, highlight Done, and then press the ENTER button. To revert to the factory defaults, highlight Reset and then press the ENTER button. To turn off the Auto Aspect ratio feature, Select Off in step 3 above. 70 70 70 Selecting the cinema mode Selecting the cinema mode When you view a DVD (3:2 pulldown processed) from a DVD player connected to the VIDEO, ColorStream HD (component video), or HDMI inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to Film. To set the Cinema Mode to Film: (available for 480i and 1080i signals) 1 Press the MENU button and open the Picture menu. 2 Highlight Picture Settings, and then press the ENTER button. 3 Highlight Advanced Picture Settings, and then press the ENTER button. 4 In the Cinema Mode field, select Film. 5 To save the new settings, highlight Done and press the ENTER button. To revert to the factory defaults, highlight Reset and press the ENTER button. Using the FREEZE feature To use the FREEZE feature: 1 When watching the TV, press the FREEZE button to freeze the picture. 2 To unfreeze the picture, press the FREEZE button again (or any other button). NOTE Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. NOTE If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically release and the TV returns to normal video. Using the TV’s features Using the TV’s features Adjusting the picture Adjusting the picture Selecting the picture mode You can select your desired picture settings from the modes described below. Mode: Description: Dynamic Bright and dynamic picture (factory setting) Standard Standard picture settings (factory setting) Movie Lower contrast for darkened room (factory setting) PC Designed for viewing of PC tables and documents Preference Your personal preferences NOTE PC mode is available for HDMI® and PC inputs only (grayed out for other input sources). To select the picture mode using the menu system: 1 Press the MENU button and open the Picture menu. 2 Highlight Mode, and then press the ENTER button. (Sample Image) Picture menu - Mode selection 72 72 72 Adjusting the picture 3 Press the ( / arrow) buttons to select the picture mode you prefer, and then press the ENTER button. (Sample Image) Mode selections screen Adjusting the picture quality You can adjust the picture quality (Contrast, Backlight, DynaLight™, Brightness, Color, Tint, and Sharpness.) to your personal preferences. Selection Pressing ( ) Pressing ( ) Contrast lower higher Backlight* darker lighter DynaLight™** On/Off On/Off Brightness darker lighter Color paler deeper Tint reddish greenish Sharpness softer sharper * Backlight: adjusts the brightness of the entire screen. When in video mode and no signal is input, this selection is automatically set to 0. (Settings are stored in memory.) **DynaLight™: automatically strengthens the black coloring of dark areas in the video according to the level of darkness. To adjust the picture quality: 1 Press the MENU button and open the Picture menu. 2 Highlight Picture Settings, and then press the ENTER button. 3 Press the ( / arrow) buttons to select the picture quality you wish to adjust (Contrast, Backlight, DynaLight™, Brightness, Color, Tint, or Sharpness), and then press the ( / arrow) buttons to adjust the setting. Using the TV’s features Using the TV’s features Using closed captions 4 To save the new settings, highlight Done, and then press the ENTER button. You can use any of...

Descargar ahora

Introduzca dos números de la imagen: