Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Standard A/V cables (red/white/yellow) Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with analog audio and composite video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. S-video cable S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection. Note: An S-video cable provides better picture performance than a composite video cable. If you connect an S-video cable, be sure to disconnect the standard (composite) video cable or the picture performance will be unacceptable. Component video cables (red/green/blue) Component video cables come in sets of three and are for use with video devices with component video output. (ColorStream® is Toshiba’s brand of component video.) These cables are typically color-coded red, green, and blue. Separate audio cables are required for a complete connection. Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable. HDMI™ cable (with HDMI Logo “ ”) HDMI (High-Definition Multimedia Interface) cable is for use with devices with an HDMI output. An HDMI cable delivers digital audio and video in its native format. This cable carries both video and audio information; therefore, separate audio cables are not required for a complete HDMI device connection (. page 17 and page 19). Note: HDMI cable provides better picture performance than a standard (composite) video or S-video cable. Optical audio cable Optical audio cable is for connecting receivers with Dolby Digital or PCM (pulse-code modulation) optical audio input to the TV’s DIGITAL AUDIO OUT terminal (. page 18). Analog RGB (15-pin) computer cable Analog RGB (15-pin) computer cable is for connecting a PC to the TV’s PC IN terminal (. page 19). About the connection illustrations You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual. 1 Chapter 2: Connecting your TV Connecting a VCR and antenna or Cable TV (no Cable box) FromCableTVorantennaYou will need: coaxialcablesstandardA/VcablesFor better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) instead of the standard video cable. Do not connect both types of video cable to VIDEO 1 at the same time or the picture performance will be unacceptable. If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal...
Otros modelos de este manual:TV - 26AV502U (5.38 mb)
TV - 32AV502U (5.38 mb)
TV - 37AV52U (5.38 mb)
TV - 26AV502U (5.38 mb)