Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Toshiba Tamaño del archivo: 6.39 mb Nombre del archivo: Idioma del manual:

Note: If you select one of the TheaterWide® picture sizes, the top and bottom edges of the picture (including subtitles or captions) may be hidden. To view the hidden edges, either scroll the picture (TheaterWide 2 and 3 only) or try viewing the program in Full or Natural picture size. Picture Size Natural Some program formats will display with sidebars and/or bars at the top and bottom. TheaterWide 1 (for 4:3 format programs) The center of the picture remains close to its original proportion, but the left and right edges are stretched wider to fill the screen. Picture Size TheaterWide 2 (for letter box programs) A B C D E F G - - - - - - - - - - - - - - - - The top and bottom edges of the picture may be hidden*. TheaterWide 3 (for letter box programs with subtitles) A B C D E F G - - - - - - - - - - - - - - - - A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - - The top and bottom edges are hidden*. Full (for 16:9 [480i, 480p] source programs only) • If receiving a squeezed 4:3 format program, the picture is stretched wider to fill the width of the screen, but not stretched taller. • None of the picture is hidden. 4:3 HD (for 720p, 1080i, and 1080p program sources only) Picture is not distorted from original size. (continued) .................................................. ............................................ Chapter 6: Using the TV’s features 35 Picture Size Native (for 480i (HDMI), 480p (HDMI), 720p, 1080i, and 1080p signal programs) • If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning). • This is especially useful for external HD sources such as DVHS movies, or PC graphics. Note: ••This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and 720p), and ANT/ CABLE (digital) inputs (1080p,1080i, and 720p). ••Depending on the input signals, the border of the picture may be hidden, displayed in black, or noisy. Dot by Dot (for VGA, SVGA, XGA, WXGA, and SXGA sources only) The “Dot by Dot” picture is non-scaling display. Depending on the input signal formats, picture is displayed with sidebars and/or bars at the top and bottom. (Example: VGA input source) ** To view the hidden areas (such as subtitles or captions), see below “Scrolling the TheaterWide® picture”. Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings: 1. Press and open the Picture menu. 2. Highlight Theater Settings and press . 3. In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode). 4. Press . to highlight the Picture Scroll field. 5. Press . or . to scroll the picture up and down as needed. 6. To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range. Using the auto aspect ratio feature When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: • A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input • A 480i signal from the VIDEO 1 or VIDEO 2 input • A 480i signal from the ColorStream HD input • A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1/2/3/4 input Aspect ratio of signal source Automatic aspect size (automatically selected when Auto Aspect is On) 4:3 normal Natural (with sidebars) 4:3 letter box TheaterWide 2 16:9 full Full Not defined (no ID-1 data or HDMI aspect data) The current picture size you set under “Selecting the picture size” on page 33. Note: The auto aspect ratio feature is not applicable to PC input. (continued) .................................................. ............................................ Chapter 6: Using the TV’s features 36 To turn on the auto aspect ratio feature: 1. Press and open the Picture menu. 2. Highlight Theater Settings and press . 3. In the Auto Aspect Ratio field, select On. 4. To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . To turn off the auto aspect ratio feature: Select Off in step 3 above. Selecting the cinema mode When you view a DVD (3:2 pulldown processed) from a DVD player connected to the VIDEO 1, VIDEO 2, ColorStream HD (component video), or HDMI inputs on the TV, smoother motion can be obtained by setting the Cinema Mode to Film. To set the Cinema Mode to Film: (available for 480i and 1080i signals) 1. Press and open the Picture menu. 2. Highlight Theater Settings and press . 3. In the Cinema Mode field, select Film. 4. To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . ...

Descargar ahora

Introduzca dos números de la imagen: