Votos - 2, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 3.14 mb Nombre del archivo: Idioma del manual:

no overscanning). Format Resolution V. Frequency VGA 640 . 480 60Hz SVGA 800 . 600 60Hz XGA 1024 . 768 60Hz Conversion adapter (if necessary) PC audio cable PC audio output Computer TV upper back panel TV lower back panel Pin No. Signal name Pin No. Signal name Pin No. Signal name 1 R 6 Ground 11 NC 2 G 7 Ground 12 NC 3 B 8 Ground 13 H-sync 4 NC * 9 NC 14 V-sync 5 NC 10 Ground 15 NC PC audio cable PC audio output Computer TV upper back panel TV lower back panel Chapter 3: Using the remote control Chapter 3: Using the remote control Preparing the remote control for use Your TV remote control can operate your TV and many other devices such as cable converter boxes, satellite receivers, VCRs, DVD players, and HTIBs (home theater in a box), even if they are different brands. If you have a Toshiba device: Your TV remote control is preprogrammed to operate most Toshiba devices (-page 24). If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate: You can program the TV remote control so it will operate the other device (-pages 22–26). Installing the remote control batteries 1 Remove the battery cover from the back of the remote control. Squeeze tab and lift cover. 2 Install two “AAA” size batteries, making sure to match the + and – signs on the batteries to the signs on the battery compartment. 3 Reinsert the battery cover in the remote control until the tab snaps. Caution: Never throw batteries into a fire. Note: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. • When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination. • Always remove batteries from the remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. Remote control effective range For optimum performance, aim the remote control directly at the TV and make sure there is no obstruction between the remote control and the TV. 16.4 ft (5m) Point remote control toward remote sensor on front of TV. Chapter 3: Using the remote control Learning about the remote control The buttons used for operating the TV only are described here. For a complete list of the remote control’s functions, see the remote control functional key chart (-page 23). Note: The error message “Not Available” may appear if you press a key for a function that is not available. 1 POWER turns the TV on and off. When the T...

Descargar ahora

Introduzca dos números de la imagen: