Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
Time And Date Start Setup Setting the HDMI™ audio mode To set the HDMI audio mode: 1 Press Yand open the Setup menu. 2 Highlight HDMI 1 Audio and press c. 3 Press b or B to select the HDMI audio mode (Auto, Digital, or Analog) and press T. (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” (-Installation Guide). Auto Digital Analog Installation Sleep Timer PC Settings On/Off Timer Setup PC Audio Auto 2 Sec HDMI 1 Audio No Slide Show Interval CH RTNENTER EXITNavigate Select Back Exit CH RTNENTER EXITNavigate Select Back Exit If you have not set up the TV Guide On Screen™ system, the following screen will appear. To set the time, highlight TV Guide On Screen™ and press T. The TV Guide On Screen™ setup sequence will start, and the time and date will be set automatically. Cancel Time And Date Manual TV Guide On Screen Your TV Guide On Screen system can provide accurate time and date information. It is recommended you set up TV Guide On Screen first and use it to obtain the time and date. If you have already set up the TV Guide On Screen™ system, or if you have not set up the time, the Time and Date setting screen will appear and you will need to manually set the time and date. In the event that your TV Guide On Screen system has acquired time, the television will use network acquired time rather than manually enterred time. Cancel Date (MM/DD/YY) Time (HH:MM) Done Time And Date :11 11 AM /06 30 / 05 Note: • If you highlight TV Guide On Screen™ (above) to set the time and date through the TV Guide On Screen™ system and a power outage occurs, the time and date will be updated automatically when the power is restored. • If you highlight Manual (above) to set the time and date manually and a power outage occurs, you will lose the time and date settings when the power is restored. • If you manually set the time and date and then perform TV Guide On Screen™ setup, the manual time and date settings will be overridden by the TV Guide On Screen™ settings. Note: Because the PC IN and HDMI (DVI) IN inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 2 on page 8 and “Setting the PC Audio mode” on page 51.) Chapter 4: Setting up your TV Chapter 4: Setting up your TV Viewing the CableCARD™ menu A CableCARD™ enables you to view encrypted digital channels. For connection and subscription information, see “Connecting a digital CableCARD™” in the Installation Guide. Note: Connecting your TV directly to the Audio/Video output of your set-top box may provide a more vivid picture. After the CableCARD™ is inserted, a CableCARD™ option appears in the Applications menu, with informational screens provided by your digital CableCARD™ service (see sample illustration under step 3, below). CableCard Connected -- Acquiring channel information. CableCard services will only operate with cable signal connected to Antenna 1. To view the CableCARD™ menu: 1 Press Y and open the Applications menu. 2 Highlight CableCARD™ and press c. 3 Press B or b to select one of the side menu items and then press T to display the information. Applications Picture Viewer IP Service Audio Player Conditional Access Channel Browser CableCARD(tm) Status TV Guide On Screen Network Setup Digital CC/Audio Selector CableCARD(tm) Pairing CableCARD ENTERNavigate Select CH RTN EXITBack Exit Note: The CableCARD™ menu is for informational purposes only and has no user-adjustable options. Viewing the digital signal meter You can view the digital signal meter for the ANT 1 and ANT 2 digital TV input sources only. To view the digital signal meter: 1 Press Yand open the Setup menu. 2 Highlight Installation and press T. 3 A new set of Installation menu icons will appear, as shown below. Open the Terrestrial menu, highlight Signal Meter, and press T. Terrestrial Input Configuration Channel Program Channel Add/Delete Signal Meter ENTERNavigate Select CH RTN Back EXIT Exit 4 Press BbC c to select the antenna input and digital channel whose signal you want to check. Note: The physical digital channel number listed in the Signal Meter screen may not correspond to a virtual TV channel number. Contact your local broadcasters to obtain the RF channel numbers for your local digital stations. Signal Meter Antenna 1 Physical Digital Channel 4 Virtual Digital Channel Done 4-1 Signal Locked 0 0Peak To close the screen and return to the Terrestrial menu: Highlight Done and press T. To return to normal viewing: Press O. Chapter 4: Setting up your TV Chapter 4: Setting up your TV Viewing the system status To view the system status: 1 Press Y and open the Setup menu. 2 Highlight Installation and press T. 3 A new set of Installation menu icons will appear, as shown below right. Open the System Status menu, hi...
Otros modelos de este manual:TV - 47LX196 (4.17 mb)
TV - 42LX196 (4.17 mb)
TV - 47LX196 (4.17 mb)