Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
To display TV status information using INFO: (only available for ANT/CABLE input) Press Q on the remote control. The following additional information will display for off air digital channels (if applicable): • Title • Duration • Detailed description To display Next information, press Q on the remote control again. Pressing Q a third time will remove the entire banner. 2-2 ANT WEATHER Stereo 480i 4:3 NONE Nashville WX Channel 8:59am - 4:59pm EST Nashville WX Channel provides Middle Tenessee and Southern Kentucky weather. Note: The location of the banner can be moved to the top or bottom of the screen by pressing B or b while the RECALL or INFO display is on-screen. (The last position will be stored to memory.) 61 XV545U (E/F) Web 177.8:228.6 52XV545U_EN.book Page 62 Monday, August 4, 2008 10:54 AM Chapter 6: Using the TV’s features Understanding the auto power off feature The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT/CABLE mode only. Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied. Note: If it is possible that you will be away from the TV for an extended period of time, you should unplug the power cord. 62 XV545U (E/F) Web 177.8:228.6 52XV545U_EN.book Page 63 Monday, August 4, 2008 10:54 AM Chapter 7: Using the TV’s advanced features Using the advanced picture settings features Using SRT™ Super Upconversion™ The SRT™ Super Upconversion™ feature allows you to select the mode and adjust the levels for your desired picture settings. To adjust the SRT Super Upconversion settings: 1 2 6 Press Y and open the Video menu. Highlight Picture Settings and press T. 3 Highlight Advanced Picture Settings and press T. 4 Highlight SRT Super Upconversion and press T. 5 In the Mode field, select either Off, Auto, Mode 1, Mode 2, or Mode 3. Mode Picture Settings Noise Reduction Video Game Mode ColorMaster Theater Settings Off x.v.Color Selection Auto Auto Brightness Sensor On TheaterLock Off Sports Mode Description Off Sets this feature Off. Auto Changes the setting automatically depending on each input signal and resolution. Mode 1 For low quality content such as a picture with much noise (e.g. SD broadcasting) Mode 2 For middle quality content such as a picture with less noise (e.g. DVD Video) Mode 3 For high quality content such as a picture with little noise (e.g. HD broadcasting) Press B or b to highlight the Level field, and then press C or c to select either 1, 2, 3, 4, or 5. 7 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: • Some of the Advanced Picture Settings features will not be available for adjustment when the Mode is set to AutoView. • This feature may not work properly depending on the content. • The noise may appear on the image depending on the device connected to the TV (e.g. a device with specific enhancer function). Using dynamic contrast When dynamic contrast is set to Low, Middle, or High, the TV will detect changes in the picture quality that affect the appearance of your contrast settings and then automatically adjust the video. To select dynamic contrast preferences: 1 From the Video menu, highlight Picture Settings and press T. 2 Highlight Advanced Picture Settings and press T. 3 In the Dynamic Contrast field, select either Off, Low, Middle or High. 4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T. Note: If you select one of the following factory-set picture modes (Sports, Standard, Movie, or PC) and then change the dynamic contrast setting, the picture mode automatically changes to Preference. (continued) 63 XV545U (E/F) Web 177.8:228.6 52XV545U_EN.book Page 64 Monday, August 4, 2008 10:54 AM Chapter 7: Using the TV’s advanced features Using the static gamma feature The static gamma feature allows you to adjust the levels of black in the picture. To adjust the static gamma settings: 1 From the Video menu, highlight Picture Settings and press T. 2 Highlight Advanced Picture Settings and press T. 3 In the Static Gamma field, press C or c to adjust the static gamma. The adjustment range is within ±5 from center. • If the setting is moved in the minus direction, the detail of black colors will be decreased. • If the setting is moved in the plus direction, the detail of black colors will be increased. 4 To save the new settings, highlight Done and press T. To revert the factory defaults, highlight Reset and press T. Note: If you select one of the factory-set picture modes (Sports, Standard, Movie, or PC) and then change the static gamma setting, the picture mode automatically changes to Preference. Selecting the color temperature You can change the quality of the picture by select...
Otros modelos de este manual:TV - 46XV545U (2.6 mb)
TV - 52XV545U (2.6 mb)
TV - 42XV545U (2.6 mb)
TV - 46XV545U (2.6 mb)