Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
Note: HDMI cable provides better picture performance than a standard (composite) video or S-video cable. Optical audio cable Optical audio cable is for connecting receivers with Dolby Digital or PCM (pulse-code modulation) optical audio input to the TV’s DIGITAL AUDIO OUT terminal (.. page 17). Analog RGB (15-pin) computer cable Analog RGB (15-pin) computer cable is for connecting a PC to the TV’s PC IN terminal (.. page 18). About the connection illustrations You can connect different types and brands of devices to your TV in several different configurations. The connection illustrations in this manual are representative of typical device connections only. The input/output terminals on your devices may differ from those illustrated herein. For details on connecting and using your specific devices, refer to each device’s owner’s manual. Chapter 2: Connecting your TV Chapter 2: Connecting your TV Connecting a VCR ( or a VCR with S-video) and antenna, Cable TV or IN OUT CH 3 CH 4 IN from ANT VIDEO AUDIO OUT to TV L R RL OUT IN CH 3 CH 4 From Cable TV or antenna To view the antenna or Cable signal: Select the ANT/CABLE video input source on the TV.* To view basic and premium Cable channels: Turn OFF the VCR. Select the ANT/CABLE video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel the Cable box output is set to). Use the Cable box controls to change channels. To view the VCR: Turn ON the VCR. Select the VIDEO 1 video input source on the TV.* To view the camcorder video: Select the VIDEO 2 video input source on the TV.* To select the video input source, press INPUT on the remote control (.. page 20). To program the TV remote control to operate other devices, see Chapter 3. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. * From Cable TV S-video cable or Standard A/V cable Audio cable Stereo VCR Cable box Camcorder VIDEOAUDIO OUT L Camcorder VIDEO 2 inputs on TV right side panel TV back panel You will need: • coaxial cables • standard A/V cables . For better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) instead of the standard video cable. Do not connect both types of video cable to VIDEO 1 at the same time or the picture performance will be unacceptable. . For better picture performance, if your camcorder has S-video, connect an S-video cable (plus the audio cables) to VIDEO 1 on the TV back side instead of the VIDEO 2 on the TV side panel. . If you have a mono VCR, connect L/MONO on the TV to your VCR’s audio out terminal using the white audio cable only. • S-video cable (if your VCR or camcorder has S-video) . Do not connect both types of video cable to VIDEO 1 at the same time or the picture performance will be unacceptable. • standard audio cables (If you ...
Otros modelos de este manual:TV - 40RV52R (5.57 mb)
TV - 40RV52R (5.57 mb)
TV - 46RV525R (5.57 mb)