Votos - 4, Puntuación media: 3.8 ( )

Fabricar: Toshiba Tamaño del archivo: 9.68 mb Nombre del archivo: Idioma del manual:

• • Do not remove the Dual Band WLAN Adapter while changing the settings of the wireless connection or communicating. There are 3 methods for wireless setup: There are 3 methods for wireless setup: • Easy Setup (WPS) If AP corresponds to WPS, this can be used. . . WPS (Wi-Fi Protected Setup™) is standard designed to execute connection of wireless LAN equipment and setup of security easily. WPS will automatically configure all wireless settings. • • Assisted Setup (setup by using AP’s notification information) Network Name, Authentication, and Encryption are decided based on information from AP. You manually set Security Key. • • Manual Setup (to input all settings) (continued) Chapter 8: Using the TV’s network features 67 Easy Setup using PBC (Push Button Configuration) 1. From the Setup menu, highlight Network Setup and press . 2. Press . or . to highlight Wireless Setup, and press . 3. Press . or . to highlight Easy Setup, and press . 4. Press . or . to select PBC. 5. Press . to highlight Start Scan, and press . 6. When a window reporting that the setup succeeded appears, press . To cancel searching for the AP: Press while searching for the AP. A message will appear. Then press . or . to select Yes and press . Easy Setup using PIN (Personal Identification Number) 1. From the Setup menu, highlight Network Setup and press . 2. Press . or . to highlight Wireless Setup, and press . 3. Press . or . to highlight Easy Setup, and press . 4. Press . or . to select PIN. 5. Press . to highlight Start Scan, and press . 6. Press . or . to select the desired AP and press . Note: If a Check the MAC address on label of the AP or the manual of it and select an AP. 7. When the PIN code window appears, enter the displayed PIN into your AP, and then press to start the PIN Setup. When a message displays to report that the setup was successful, press . To cancel searching for the AP: Press while searching for the AP. A message will appear. Then press . or . to select Yes and press . Assisted Setup 1. From the Setup menu, highlight Network Setup and press . 2. Press . or . to highlight Wireless Setup, and press . 3. Press . or . to highlight Assisted Setup, and press . 4. Press . or . to select the desired AP and press . Note: If a Check the MAC address on label of the AP or the manual of it and select an AP. 5. Highlight Security Key and press . The Software Keyboard window will appear. 6. Input the Security Key by using the Software Keyboard (. page 70). To save your setting, press the BLUE button. Note: • • The Security Key must adhere to these conditions: . . TKIP/AES: 8-63 ASCII or 64 Hex characters . . WEP: 5 or 13 ASCII or 10 or 26 Hex characters • • Key ID of WEP encryption to set is only one. 7. Highlight Done, and then press . Note: If Network Name is not displayed, see step 4 and 5 in Manual Setup (. the next column) to set Network Name before pressing Done. Note: Settings are not saved if is pressed before Done is...

Descargar ahora

Introduzca dos números de la imagen: