Votos - 2, Puntuación media: 4.5 ( )

Fabricar: Toshiba Tamaño del archivo: 2.34 mb Nombre del archivo: Idioma del manual:

These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control. Chapter 3: Using the remote control Chapter 3: Using the remote control Searching and sampling the code of a device (8500) If you do not know the device code for a particular device, you can cycle the remote control through the available codes for that device mode and sample the functions to find the code that operates the target device. The keys available to be sampled, provided they are applicable to that mode, are p, 1, z, <, and S. Invalid keys will be ignored while in program mode. To cycle through each available device code and sample its functions: 1 Press the appropriate mode select button on the remote control. 2 While holding down E, press 8, 5, 0, 0. The remote control will enter program mode. 3 Point the remote control at the target device and press p (or other function buttons that are available to be sampled). 4 If the device responds to the remote control: Press Eto store the device code. The mode select button will blink two times, and the remote control will exit the program mode. If the device does not respond to the remote control: Press B, and then press p. Repeat this step until the device responds to the remote control, and then press E. Note: When a search cycle is completed, the mode select button will blink three times. The remote control will begin to cycle through the available codes again. If no key is pressed within 10 seconds during programming, the remote control will exit the program mode and return to the previous code. Using the volume lock feature (8000) By default (factory setting), the remote control’s volume keys (z, Z and W) are locked to the “TV” device mode. The remote control will operate the TV’s volume, even when “TV” is not the current device mode. If you unlock the remote control’s volume keys, each device mode will have its own volume (if the device ID has volume data). The remote control will operate the volume of the device associated with the current device mode. If you lock the remote control’s volume keys to a specific device mode, the remote control will operate the volume of the device associated with the locked mode, even when the locked mode is not the current device mode. See “Using the remote control to operate your other devices” on page 24. To lock the remote control’s volume keys to a specific mode (CABLE/SAT in this example): 1 Press CABLE/SAT. 2 While holding down the E button, press 8, 0, 0, 0. 3 Press z. The CABLE/SAT mode select button will blink two times (locked). The remote control’s volume keys will now operate the volume of the device associated with the CABLE/SAT mode, even when CABLE/SAT is not the current device mode. To unlock the remote control’s volume keys: 1 While holding down E, press 8, 0, 0, 0. 2 Pre...

Descargar ahora

Introduzca dos números de la imagen: