Votos - , Puntuación media:
(
)
)
Fabricar: Toshiba
Tamaño del archivo: 3.97 mb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
Note: For the highest possible picture quality, use component video cables (or an HDMI cable) between the TV and DVD player. You can connect the component video cables to either set of ColorStream inputs on the TV (HD1 or HD2). For HDMI or DVI connection, see page 16. The ColorStream HD1/HD2 and HDMI inputs can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems; however, a 1080i signal will provide the best picture performance. If your DVD player is not compatible with component video, HDMI, or DVI, use the S-video connections (plus the standard audio connections) instead (see page 12). Stereo VCR From Antenna TV 14 Connecting your TV IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT VIDEO OUT S-VIDEO AUDIO COMPONENT VIDEO OUT L R L R Y PB PR Satelite IN Connecting a DTV receiver/set-top box with ColorStream® (component video) and a VCR This connection allows you to watch DTV (digital TV), VCR, and TV programs, and record DTV (component video) and TV programs. Your TV has ColorStream® (component video) inputs. Connecting your TV to a DTV receiver with component video can greatly enhance picture quality and realism. – To record and watch a DTV program, select LINE IN on the VCR, and select ColorStream HD2 (or VIDEO 1 for a non- ColorStream connection) on the TV (see “Selecting the video input source” on page 52). – To record a TV program while watching a DTV program, tune the VCR to the channel to record, and select ColorStream HD2 on the TV. – To record and watch the same TV program, tune the VCR to the channel to record, and select VIDEO 1 on the TV. – To record one TV program while watching another TV program, tune the VCR to the channel to record, and tune the TV to the channel to watch. You will need: • three coaxial cables • two sets of standard A/V cables • one pair of standard audio cables • one set of component video cables Note: For the highest possible picture quality, use component video cables (or an HDMI cable) between the TV and DTV receiver/set-top box. You can connect component video cables to either set of ColorStream inputs on the TV (HD1 or HD2). For HDMI or DVI connection, see page 16. The ColorStream HD1/HD2 and HDMI inputs can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems; however, a 1080i signal will provide the best picture performance. If your DTV receiver or set-top box is not compatible with component video or HDMI, use the S-video connections (plus the standard audio connections) instead (see page 12). The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. DTV Receiver with component video TV From Antenna Stereo VCR From DTV Antenna 15 Introduction Connecting your TV Using the Remote Control Setting up your TV Using the TV’s Features Appendix Index E S Connecting two VCRs F This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You also can record from one TV channel while watching another TV channel. You will need: • two coaxial cables • two sets of standard A/V cables IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT VIDEO AUDIO CH 3 L R CH 4 IN OUT Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. You will need: • one set of standard A/V cables VIDEO AUDIO OUT L R ** Note: If you have VCRs with S-video, use S-video cables instead of standard video cables for better picture performance. Do not connect the same VCR to the output and input jacks on the TV at the same time. To dub or edit, VCR 2 must select Line IN, and the TV must select VIDEO 1 (see “Selecting the antenna input” on page 28). * The Video OUT jack does not output the POP picture. ** The Audio OUT jacks can output the sound of either the Main or POP picture (see “Selecting the AUDIO OUT sound” on page 59). VCR1 From Antenna TV VCR2 * Note: If you have a camcorder with S-video, use an S-video cable instead of a standard video cable for better picture performance. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Camcorder Video-3 (side panel) 16 Connecting your TV [1] HDMI = High-Definition Multimedia Interface. [2] DVI = Digital Video Interface. [3] HDCP = High-bandwidth Digital Content Protection. [4] EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. Connecting an HDMI™ or a DVI device ...
Otros modelos de este manual:TV - 42HP84 (3.97 mb)