Votos - 3, Puntuación media: 5 ( )

Fabricar: Toshiba Tamaño del archivo: 1.92 mb Nombre del archivo: Idioma del manual:

To cancel the sleep timer: Press TIMER until it is set to 0. The timer can also be set using the on-screen menu: 1. Press MENU, and then press x or • until the SETUP menu appears. 2. Press y or z to highlight TIMER. 3. After the number position starts to blink, press the Channel Number buttons (0-9) to enter the length of time until the TV turns off automatically. 4. Press ENTER to start the timer. CUSTOM T I MER CC C1 120 FAVOR I CH 1 TE FAVOR I CH 2 TE V BACKGROUND I DEO CH LABEL LABEL ING Setting the clock To set the clock: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z to highlight CLOCK SET. 3. After the number position starts to blink, press the Channel Number buttons (0-9) to enter the correct time. The clock operates on a 12-hour cycle. 4. Press ENTER to start the clock. SET UP LANGUAGE CLOCK ANT ADD ADDERASE/ TV CH PROGRAM CABLE/ CABLE 1 ANT 09 2 5 : 1/2 SET ENGL SHI 1 2 3 4 5 6 7 8 9 ENT100 0 CH VOL POWER TIMER RECALL TV/VIDEOMUTE TV CABLE VCR CH RTN PIC SIZE EXIT LIGHT ADV/ POP CH ADV/ POP CH FAV FAV FAVORITE MENU/ C.CAPT ENTER POWER RECALL TIMER Number MENU/ENTER yzx • EXIT Note : If the TV’s power source is interrupted (the power cord is unplugged or a power failure occurs), the clock must be reset. To display the time on-screen: Press RECALL. 43 IntroductionConnectingyour TV Using theRemote Control Setting upyour TV Using the TV’s Features AppendixIndex Adjusting the sound Muting the sound Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display the word “1/2 MUTE” or “MUTE” in the RECALL lower right corner. Every time you press the button, the mute mode will change in the following order. > Normal > 1/2 MUTE > MUTE MUTE When you select “MUTE” mode, the closed caption feature is automatically activated. To deactivate this feature, press MUTE again. This feature works only when the closed caption mode is set to OFF. See “Using the closed caption feature” on page 42 for more information. Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to listen to MENU high-fidelity stereo sound while watching TV. MTS can also transmit yzx • a second audio program (SAP) containing a second language, music, or other audio information (when provided by individual stations). When the TV receives a stereo or SAP broadcast, the word STEREO or SAP appears on-screen every time the TV is turned on, the channel is changed, or the RECALL button is pressed. The MTS feature is not available when the TV is in VIDEO mode. To listen to stereo sound: 1. Press MENU, and then press x or • until the AUDIO menu appears. 2. Press y or z to highlight MTS. 3. Press x or • to highlight STEREO. 1 2 3 4 5 6 7 8 9 ENT100 0 CH VOL POWER TIMER RECALL TV/VIDEOMUTE TV CABLE VCR CH RTN PIC SIZE EXIT LIGHT ADV/ POP CH ADV/ POP CH FAV FAV FAVORITE MENU/ C.CAPT ENTER POWER TOUCH FOCUSTV/VIDEOEXIT VOL VOL CH CH MENU yzx•MENU Using the TV’s Features AUD OI MTS BASS STEREO SA P MONO/ / 50 50 0 TREBLE BALANCE RESET You can leave your TV in STEREO mode because it will automatically output the type of sound being broadcast (stereo or monaural). The word “STEREO” or “SAP” displays in yellow in the menu when the TV receives the signal. If the stereo sound is noisy, select MONO to reduce the noise. To listen to SAP (if available): 1. Press MENU, and then press x or • until the AUDIO menu appears. 2. Press y or z to highlight MTS. 3. Press x or • to highlight SAP. You will hear the station’s second audio program (if available) from the speakers, while viewing the original program’s picture (see note at right). Note : A second audio program (SAP) can be heard only on those TV stations that offer it. For example, a station might broadcast music as a second audio program. If you have SAP on, you will see the current program on the screen but hear music instead of the program’s normal audio. However, if you have SAP on, and the station you are watching is not currently broadcasting a second audio program, you will see the picture but not hear any sound. If this happens, put the TV in STEREO mode so you can hear the station’s normal audio. 44 Using the SRS 3D surround sound feature The SRS 3D surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality from the TV’s speakers. The feature uses stereo signals from a TV broadcast or video input. To turn on the SRS 3D surround: 1. Select STEREO mode (see “Selecting stereo/SAP broadcasts” on page 44). 2. Press MENU, and then press x or • until the THEATER menu appears. 3. Press y or z to highlight SRS 3D. 4. Press x or • to highlight ON. THEATER SRS 3D P I CTURE SCROLL ON OFF/ To turn off the SRS 3D surround: Highlight OFF in step 4 above. In general, you can leave your TV in ON mode because it will automatically produce the type of sound being broadcast (surround stereo or monaural). Adjusting the sound quality You can change the quality of your TV’s sound by...

Descargar ahora

Introduzca dos números de la imagen: