Votos - 1, Puntuación media: 3 ( )

Fabricar: Toshiba Tamaño del archivo: 12.81 mb Nombre del archivo: Idioma del manual:

• TV Auto Input Switch: On/Off • TV Auto Power: On/Off • Device Auto Standby: On/Off • Speaker Preference: TV Speakers/Audio Receiver 5. To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Displaying TV status information To display TV status information : Press on the remote control. The following information will display (if applicable): • Current input (ANT/CABLE, VIDEO, etc.) • If ANT/CABLE is the current input, either “CABLE” (for cable TV) or “ANT” (for over-the-air broadcasts). • Channel number (if in ANT/CABLE mode) • Channel label (if applicable) • Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signal only) • Stereo, Mono or SAP audio status (when HDMI input mode, Dolby Digital or PCM) • Video resolution • Aspect ratio of incoming video signal (4:3 or 16:9) • V-Chip rating status • GameTimer (if set) To close the screen (except ANT/CABLE input): Press again. The following additional information will display for ANT/CABLE input (if applicable): • Title • Duration • Detailed description • To display next program information for digital channels, press again. Pressing a third time will remove the entire banner. Understanding the auto power off feature The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. Note: •If you want to set this feature to off, see “No Signal Power Down” on page 49. •If it is possible that you will be away from the TV for an extended period of time, you should unplug the power cord. Understanding the last mode memory feature If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is resupplied. Note: If it’s possible, and you will be away from the TV for an extended period of time you should unplug the power cord. Note: The location of the banner can be moved to the top or bottom of the screen by pressing • or • while the INFO display is on-screen. Chapter 7: Using the TV’s advanced features Using the advanced picture settings features Using Dynamic Contrast Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video. To select Dynamic Contrast preference: 1. From the the Picture menu, highlight Picture Settings and press . 2. Highlight Advanced Picture Settings and press . 3. Press • or • to select Dynamic Contrast. 4. Press • or • to select High, Middle, Low and Off. Using the Static Gamma feature The Static Gamma feature allows you to adjust the levels of black in the picture. To adjust the Static Gamma settings: and open the Picture menu. 1. Press 2. Highlight Picture Settings and press . 3. Highlight Advanced Picture Settings and press . • In the Static Gamma field, press • ...

Descargar ahora

Introduzca dos números de la imagen: