Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Press yz to select the picture quality you want to adjust (Contrast, Brightness, Color, Tint, or Sharpness), and then x • to adjust the setting, as described in the table above. Picture Settings Mode: Preference Sharpness 70 4. To save the new settings, highlight Done and press ENTER. To revert back to the factory defaults, highlight Reset and press ENTER. The picture qualities you adjusted are automatically saved in the Preference mode (see “Selecting the picture mode,” above left). Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. Chapter 8: Using the TV’s features Chapter 8: Using the TV’s features Adjusting the picture (continued) Using CableClear® /DNR (digital noise reduction) The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc. To select CableClear/DNR preferences: 1. Press MENU and open the Video menu. 2. Highlight Advanced Picture Settings and press ENTER. 3. Press z to highlight the CableClear/DNR field, and then press x • to make a selection. Picture Settings Advanced Picture Settings Theater Settings Video Done CableClear Auto Color Temperature Back Lighting Cool Dynamic Contrast On MPEG Noise Reduction Low Reset ANT 1Advanced Picture Settings 100 Note: • For the current inputs Antenna, Video 1, or Video 2, the menu will display the text “CableClear.” If the signal is analog, the available selections are Off, Low, Middle, High, and Auto. If the signal is digital, the menu will display the text “CableClear” and will be “grayed out” with “Off” selected. • For the current inputs built-in DVD, ColorStream HD, or HDMI, the menu will display the text “DNR.” If the video resolution is 480i, the available selections are Off, Low, Middle, High, and Auto. If the video resolution is 1080i, the available selections are Off, Low, and High. If the video resolution is anything other than 480i or 1080i, the menu will display the text “DNR” and will be “grayed out” with “Off” selected. 4. To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER. Selecting the color temperature You can change the quality of the picture by selecting from three preset color temperatures (cool, medium, and warm), as described below. Mode Picture Quality Cool blueish Medium neutral Warm reddish To select the color temperature: 1. Press MENU and open the Video menu. 2. Highlight Advanced Picture Settings and press ENTER. 3. Press z to highlight the Color Temperature Picture Settings Theater Settings Video Advanced Picture Settings field, and then press x • to select the mode you prefer (Cool, Medium, or Warm). Done CableClear Auto Back Lighting Dynamic Contrast On MPEG Noise Reduction Low Reset ANT 1Advanced Picture Settings 100 Color Temperature Cool 4. To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER. Note: If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change the color temperature mode, the picture mode automatically changes to Preference in the Picture Settings menu. Adjusting the back lighting feature You can use the back lighting feature to adjust the screen brightness for improved picture clarity. To adjust the back lighting: 1. Press MENU and open the Video menu. 2. Highlight Advanced Picture Settings and press ENTER. 3. Press z to highlight Back Lighting, and then press x • to adjust the screen brightness (0-100). ANT 1Advanced Picture Settings Done CableClear Auto Color Temperature Back Lighting Cool Dynamic Contrast On Reset 100 MPEG Noise Reduction Off 4. To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER. Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. Chapter 8: Using the TV’s features Chapter 8: Using the TV’s features Adjusting the picture (continued) Using MPEG noise reduction The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are High, Medium, Low and Off. Off is automatically selected when this feature is disabled (“grayed out”). This feature is not available in the PC input mode. To select the MPEG noise reduction level: 1. Press MENU and open the Video menu. 2. Highlight Advanced Picture Settings and press ENTER. 3. Press z to highlight the MPEG Noise Reduction field, and then press x • to make a selection. Picture Settings Advanced Picture Settings Theater Settings Video ANT 1Advanced Picture Settings Done CableClear Auto Color Temperature Back Lighting Cool Dynamic Contrast On Reset 100 MPEG Noise Reduction Off 4. To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER. Using dynamic contrast Whe...
Otros modelos de este manual:TV - 27HLV95 (3.06 mb)