Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
playback starts from the beginning of Each time you press and hold SKIP, the playback speed will change. the preceding chapter or track. Notes: ” may appear at the upper left of the screen. This symbol means either the feature you tried is not •A prohibition symbol “ available on the disc, or the TV/DVD cannot access the feature at this time. This does not indicate a problem with the TV/DVD. • The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen. Projection televisions are very susceptible. 30 5W40101A [E] (P28-30) 30 2/15/06, 4:56 PM Advanced playbackAdvanced playback Zooming/Locating desired scene ZoomingDVD VCD CD This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. 1 Press / / / to view a different part of the frame. You may move the frame from the center position to UP, DOWN, LEFT or RIGHT direction. In the zoom mode, press ZOOM repeatedly to return to a 1:1 view ( Off). Press ZOOM during playback. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). 1 2 3 Notes: •You can select the Pause, Slow or Search playback in the zoom mode. • Some discs may not respond to zoom feature. DISPLAY 0–9 JUMP ZOOM / / / CANCEL ENTER DVD VCD CD Locating desired scene Use the title, chapter and time recorded on the DVD disc to locate the desired point to playback. In the case of VCD/CD discs, time and track are used to locate the desired point to playback. To check the title, chapter and time, press DISPLAY. Advanced playback Press JUMP during playback or stop mode. Press Number buttons (0–9) to input the number. • If you input a wrong number, press CANCEL. • Refer to the package supplied with the disc to check the numbers. Press ENTER. Playback starts. • When you change the title, playback starts from Chapter 1 of the selected title. • Some discs may not work in the above operation. 1 2 4 3 Press or to select the “ Time”, “ TT Title/Track” or “ TC Chapter”. T C T C T C 12 • “Time” works only in DVD playback or DVD resume mode. Note: In case of the Video-CD playback with PBC, the JUMP does not work. To turn off PBC, see page 37 . 31 5W40101A [E] (P31-33) 31 2/15/06, 4:56 PM Advanced playback Advanced playback Marking desired scenes The unit stores the points that you want to watch again up to 3 points. You can resume playback from each scene. / ENTER CANCEL MARKER Marking the scenes Returning to the scenesDVD VCD DVD VCD 1 2 3 Press MARKER during playback. Press MARKER to clear this display. Select the blank Marker using or , then press ENTER at the desired scene. • Up to 3 scenes can be selected. • Repeat this procedure to set the other 2 scenes. Press MARKER during playback or stop mode.1 2 3 Press ENTER. Playback starts from the marked scene. Press or to select the Marker 1-3. To cancel the Marker Follow the above steps 1~2, then press CANCEL. Notes: • Some discs may not work with the marking operation. • The marking is cancelled when you open the disc tray or turn the power off. • Some subtitles recorded around the marker may fail to appear. • In case of Video CD with PBC, the MARKER is prohibited. 32 5W40101A [E] (P31-33) 32 2/15/06, 4:56 PM Repeat playback/A-B Repeat playback PLAY MODE REPEAT A-B / PLAY ENTER DVD VCD CD DVD VCD CDRepeat playback A-B Repeat playback [Video CD, Audio CD, MP3/WMA CD] Press to select “Repeat” and then press ENTER to select “Track” or “All”. The unit automatically starts repeat playback after finishing the current track. • If you set the repeat mode during stop mode, press PLAY to start Repeat playback. 1 Press PLAY MODE during playback or stop mode. Press PLAY MODE again to clear the screen.3 2 [DVD] Press / to select “Chapter” or “Title”. The unit automatically starts repeat playback after finishing the current title or chapter. To resume normal playback Select Repeat : “Off” in step 2. :Repeat Off :Repeat Off :Play Mode Off /Enter/Play Mode Notes: • Some discs may not work with the repeat operation. • In case of Video CD with PBC, Repeat functions are prohibited during playback. A-B repeat playback allows you to repeat a section between two selected points. Advanced playback 1 Press REPEAT A-B during playback. The start point is selected. 2 To resume normal playback Press REPEAT A-B again. “ Off ” appears on the screen. A AB Press REPEAT A-B again. The end point is selected. Playback starts at the point that you selected. Playback stops at the end point and returns to Point A automatically, then starts again. Notes: • In A-B Repeat mode, subtitles near the A or B locations may not be displayed. •You cannot set the A-B Repeat for the scenes that include multiple angles. • A-B Repeat playback does not work when...
Otros modelos de este manual:TV - MD24F52 (2.99 mb)