Votos - 1, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 1.78 mb Nombre del archivo: Idioma del manual:

• When you watch the TV through a cable box or VCR with the TV tuned to channel 3 or 4, you must release the V-Chip temporarily by entering your password. The V-Chip setting will be resumed when you turn the TV off and then on again. Use the cable box or VCR to change channels in this case. • When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program appears. • If you forget or lose your password, you can reset it using the following procedure: -While holding down the VOLUME button on the TV, press “0” on the remote control for a few seconds. 10 3X00121A(E)_P08-12 10 22/12/05, 4:15 PM USING THE LOCK MENU The LOCK menu includes the CH LOCK, VIDEO LOCK, GAMETIMER and CHANGE PASSWORD functions. You can use these functions after entering the correct PASSWORD. (This password is the same one selected under “SETTING THE V-CHIP” on page 10.) LOCKING CHANNELS With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels. 1 2 3 Use the Channel Number buttons (0–9) to display the television channel you wish to lock. Press MENU, then press SET + or – until the indicator next to “LOCK” begins to flash. Then press ENTER. Use the Channel Number buttons (0–9) to enter your password, then press ENTER. The LOCK menu appears. Press SET + or – until the indicator next 4 to “CH LOCK” begins to flash, then press ENTER. Press SET + or – to select: 5 • INPUT to select the channel as one to be locked. Then press ENTER. • ALL CLEAR to clear all channels from the list of locked channels. Then press ENTER. Repeat steps 1 through 5 to lock other channels. When you 6 are finished locking channels, press MENU repeatedly until the menu screen is cleared. If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel. NOTES: • If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password. • After programming CH LOCK, change channels before turning off the television. • If you want to unlock channels, select ALL CLEAR in step 5, then press ENTER. LOCK .+ / – / ENTER / MENU . GAME TIMER CH LOCK VIDEO LOCK CHANGE PASSWORD CH LOCK .+ / – / ENTER / MENU . CABLE INPUT ALL CLEAR --------- --------- --------- LOCKING VIDEO INPUT With the VIDEO LOCK feature, you can lock out the input source (VIDEO) and channels 3 and 4. You will not be able to select the input sources with the TV/ VIDEO button or Channel buttons unless you clear the setting. Press MENU, then press SET + or – until the indicator 1 next to “LOCK” begins to flash, then press ENTER. Use the Channel Number buttons (0–9) to enter your 2 password, then press ENTER. The LOCK menu appears. Press SET + or – until the indicator 3 next to “VIDEO LOCK” begins to flash, then press ENTER. 4 Press SET + or – to select: • OFF: Unlocks all...

Descargar ahora

Introduzca dos números de la imagen: