Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
NOTES: • If you are accessing the LOCK menus or V-chip menus for the first time, choose a four-digit number to be your password. • After programming CH LOCK, change channels before turning off the television. • If you want to unlock channels, select ALL CLEAR in step 5, then press ENTER. LOCKING VIDEO INPUT With the VIDEO LOCK feature, you can lock out the input source (VIDEO) and channel 3 and 4. You will not be able to select the input sources with the TV/ VIDEO button or Channel buttons unless you clear the setting. Press MENU, then press SET + or – until the indicator next to “LOCK” begins to flash, then press ENTER. Use the Channel Number buttons (0-9) to enter your password, then press ENTER. The LOCK menu appears. Press SET + or – until the indicator next to “VIDEO LOCK” VIDEOLOCK .+/./ENTER/MENU. OFFVIDEOVIDEO+ begins to flash, then press ENTER. Press SET + or – to select: 4 • OFF: Unlocks all video input sources. • VIDEO: Locks VIDEO. • VIDEO +: Locks VIDEO, channel 3 and channel 4. This option should be used if you use the antenna to play a video tape. Press MENU to return to normal viewing. 5 NOTE: SETTING THE GAME TIMER With the GAME TIMER feature, you can automatically activate the VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a TV game (30, 60, 90, or 120 minutes). Press MENU, then press SET + or – until the indicator next to 1 “LOCK” begins to flash, then press ENTER. Use the Channel Number buttons (0-9) to enter your password, 2 then press ENTER. The LOCK menu appears. Press SET + or – until the indicator next to 3 “GAME TIMER” begins to flash, then press ENTER. Press SET + or – to select a time limit 4 (30 minutes, 60 minutes, 90 minutes, 120 GAMETIMER .+/./ENTER/MENU. OFF306090120 minutes or OFF). Press MENU repeatedly until the MENU screen is cleared. 5 After the GAME TIMER is programmed, the display will appear briefly every ten minutes to remind you that the GAME TIMER is operating. When the programmed end time is reached, the display will change the channel automatically. After programming VIDEO LOCK, change channels or activate the TV/VIDEO key before turning off the television. TO SET THE ON TIMER This feature allows you to program the TV to turn on automatically at a set time and channel. NOTE: After a power failure or disconnection of the power, the timer setting will be lost. 1 Press MENU, then press SET + or – until ONTIMERa+/./ENTER/MENUnHOURMINUTE00hCH00200mCANCEL 4 Press SET + or – to set the desired the indicator next to “ON TIMER” begins channel, then press ENTER. to flash. Then press ENTER. The ON TIMER menu appears. ONTIMERa+/./ENTER/MENUnHOURMINUTE08hCH12515mSET 2 Press SET + or – to set the desired hour (0-12), then 5 Press SET + or – to select the SET mode, then press ENTER. press ENTER. 6 Press MENU repeatedly until the MENU screen is cleared. 3 Press SET + or – to set the desired minute (00, 05, 10, ...55), then press ENTER. NOTE: To cancel the ON TIMER, select CANCEL in step 4 above. Press MENU repeatedly until the MENU screen is cleared. TROUBLESHOOTING GUIDE Before requesting service, please refer to the following chart for the symptom and possible solution. SYMPTOMS POSSIBLE SOLUTIONS TV does not operate • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off; check fuse or circuit breaker. • Unplug unit for an hour, then plug it back in. Poor sound or no sound • Station or CATV experiencing problems; tune to another station. • Check sound adjustments (VOLUME and MUTE). • Check for sources of possible interference. Poor picture or no picture • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • Check antenna or CATV connections; adjust antenna. • Check for sources of possible interference. • Check picture control adjustments. • Press CAP/TEXT to turn off the Closed Caption mode. Poor reception on some channels • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • Station is weak; adjust antenna to receive desired station. • Check for sources of possible interference. Poor color or no color • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • Check picture control adjustments. • Check antenna or CATV connection. Adjust antenna. Picture wobbles or drifts • Station or CATV experiencing problems; tune to another station. • Make sure channels are set into memory. • CATV company is scrambling signal. • Adjust antenna. SYMPTOMS POSSIBLE SOLUTIONS No CATV reception • Check all CATV connections. • Set TV/CABLE menu option to the CABLE mode. • Station or CATV system problems; try another station. Horizontal or diagonal bars on screen • Check antenna connections; reorient antenna. • Check for sources of possible interference. No reception above channel 13 • Make sure TV/CABLE menu option is in the appropriate mode. • If using antenna, check UHF antenna connection...
Otros modelos de este manual:TV - 20AS23 (1.17 mb)