Votos - 5, Puntuación media: 4.2
(
)
)
|
Resumen del manual
Incoming CATV Note: When you use a converter box with your TV, there may be features that you cannot program using the remote control, such as labeling channels, blocking channels, and programming your favorite channels. VIDEO Y PB PR AUDIO L/MONO R VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 AUDIO S-VIDEO L/MONO R Converter/Descrambler A B Converter/Descrambler A / B Switch Splitter 8 3N11501A[E] P07-16 8 8/1/18, 12:25 Connecting a DVD player/satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record from the satellite receiver and TV, as well as record one TV channel while watching another channel. To satellite DVD player/ Satellite Receiver TV To antenna Stereo VCR Y PB PR AUDIO L/MONO VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 UDIOS-VIDEO L/MONO R IN OUT VIDEO IN from ANT CH 3 CH 4 OUT to TV UDIO L R Satellite IN S-VIDEO OUT UDIO L Connecting a DVD player with ColorStream® (component video) and a VCR This connection allows you to watch DVD, VCR, or TV programs and record TV programs. You can record from one source while watching a program from another source. Your TV is capable of using ColorStream (component video). Connecting your TV to a component video compatible DVD player, such as a Toshiba DVD player with ColorStream®, can greatly enhance picture quality and performance. DVD player with ColorStream® IN OUT VIDEO IN from ANT CH 3 CH 4 OUT to TV UDIO L R OUT AUDIO OUT VIDEO COLORSTREAM Y Cb Cr L S-VIDEO TM VIDEO Y PB PR AUDIO L/MONO R VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 UDIOS-VIDEO L/MONO TV To antenna Stereo VCR You will need: • three coaxial cables • two sets of standard A/V cables • one S-video cable • one pair of standard audio cables Note: You can use a standard video cable instead of the S-video cable, but the picture quality will decrease. If you use an S-video cable between the TV and DVD player/satellite receiver, make the audio connections only and remove the standard video cable. You will need: • two coaxial cables • one set of standard A/V cables • one set of component video cables • one pair of standard audio cables Note: The ColorStream inputs on this TV are for use with devices that output 480i interlaced signals ONLY. This TV will not accept or display 480p or 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-definition set- top receiver, 480p progressive scan DVD player, or other similar device to the TV’s ColorStream inputs, YOU MUST SWITCH THE DEVICE’S OUTPUT TO 480i INTERLACED MODE FIRST. Failure to do this will cause a poor picture or no picture to display. The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. 9 3N11501A[E] P07-16 9 8/1/18, 12:25 AppendixUsing the TV’s Features Setting upyour TV Using theRemote ControlWelcome to Toshiba ImportantSafeguards Connectingyour TV Connectingyour TV Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR. You will also be able to record from one TV channel while watching another channel. Stereo VCR / Playback To antenna TV Stereo VCR/ Recording IN OUT VIDEO IN from ANT CH 3 CH 4 OUT to TV AUDIO L R IN OUT VIDEO IN from ANT CH 3 CH 4 OUT to TV AUDIO Y PB PR AUDIO L/MONO VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 AUDIO S-VIDEO L/MONO R Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. VIDEO AUDIO L R OUT VIDEO L/MONO AUDIO R PHONES VIDEO-3 IN Camcorder Front Panel of TV Connecting an audio amplifier This connection allows you to use an audio amplifier to enjoy a high- quality sound. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier. Audio Amplifier TV To cable, cable box or antenna IN OUT AUDIO L R VIDEO Y PB P AUDIO L/MONO R VIDEO IN OUT ANT (75.) VIDEO 1 VIDEO 2 AUDIO S-VIDEO L/MONO R 10 You will need: • two coaxial cables • two sets of standard A/V cables Note: Do not connect the same VCR to the output and input jacks on the TV at the same time. For better picture quality, if your VCR has S- video, you can use an S-video cable instead of the standard video cable. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously. You will need: • one set of standard A/V cables Note: For better picture quality, if your camcorder has S-video, you can connect an S-video (and standard audio cables) to VIDEO1 on the back of the TV. Do not connect a standard video cable and an S-video cable to VIDEO1 simultaneously. You will need: • one coaxial cable • one pair of audio cables The unauthorized recording, use, distribution or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject...
Otros modelos de este manual:TV - 27AF44 (811.71 kb)