Votos - 2, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 2.77 mb Nombre del archivo: Idioma del manual:

Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. You will need: • one set of standard A/V cables VIDEO AUDIO OUT L R Note: Camcorder If you have an S-VHS camcorder, use an S-video cable between the S-video jacks on the camcorder and TV instead of a standard video cable. Do not connect both a standard video cable and an S-video cable at the same time, or the picture performance will be unacceptable. DEMO MENU TV/VIDEO V OLUME CHANNEL VIDEO-3 IN VIDEOS-VIDEO AUDIO L/MONO R Video-3 (front panel) 12 Connecting an audio system TV This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier, and LINE IN L R ANT-1 OUT ANT-2 ANT(75 ) S-VIDEO VIDEO L/MONO AUDIO R VIDEO-2VIDEO-1 Y PB PR L Y PB PRAUDIO COLOR STREAM HD - 2 COLOR STREAM HD - 1 R L AUDIO R OUT AUDIO CENTER CHANNEL IN L/ MONO AUDIO ON OFF VIDEO VAR AUDIO L RR IN IN turn off the built-in speakers (see “Turning off the built-in speakers” on page 47). You will need: • one pair of audio cables Note: To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero). For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level. Connecting an A/V receiver Caution: This connection allows you to use an audio/video (A/V) receiver to Amplifier enhance your TV’s sound. If you have a system with Dolby Pro Logic® surround sound, you can add to the realism of the sound by using the TV’s internal speakers as To avoid damaging the speakers: • Turn off the TV before connecting or disconnecting the Audio Center Channel cable. center channel speakers. • Do not connect from the A/V receiver’s You will need: Center Speaker OUT (amplified signal) to • one coaxial cable (may be provided by your cable company) the TV’s Audio Center Channel IN. • one set of standard A/V cables • one single audio cable for the audio center channel ANT-1 OUT ANT(75 ) S-VIDEO VIDEO L/MONO AUDIO R VIDEO-2VIDEO-1 Y PB PR L Y PB PRAU DIO COLOR STREAM HD - 2 COLOR STREAM HD - 1 R L AUDIO R OUT AUDIO CENTER CHANNEL IN L/ MONO AUDIO ON OFF VIDEO VAR AUDIO L RR IN IN ON OFF TV From Antenna From To TV IN From video OUT Center OUT To A/V Receiver Note: Refer to the instructions provided with your A/V receiver for details about your surround sound system. When the Audio Center Channel ON/OFF switch is in the ON position, the TV speakers will function only as center channel speakers. At this time, the SBS feature should be set to OFF. See page 46. Adjust the volume for the center channel speakers using the center level control on the A/V receiver. Dolby Pro Logic* surround sound system connection example T V Right speaker Left speaker Surround speaker L Surround speaker R VCR A/V receiver Audio Video Video AudioVideoAudiocenterchannel Audio LDP/DVD Index AppendixUsing the TV’sSetting upUsing theConnectingIntroductionFeatures your TV Remote Control your TV _________ To use the TV speakers as normal speakers, set the Audio Center *Dolby Pro Logic is a registered trademark of Channel ON/OFF switch to the OFF position. Dolby Laboratories Licensing Corporation. 13 Index AppendixUsing the TV’sSetting upUsing theConnectingIntroductionFeatures your TV Remote Control your TV Using the remote control Preparing the remote control for use With the remote control, you can operate your TV, most VCR models, and cable TV converters together, even if they are different brands. If you will be using your TV with a Toshiba VCR, your remote control is already programmed and ready to use. If you own different brands of VCRs and/or converters, you first have to program your remote control. (See “Programming the remote control for use with a non-Toshiba VCR or a cable TV converter” on page 15.) Installing the remote control batteries To install the batteries: 1. Slide the battery cover off the back of the remote control. 2. Install two “AA” size alkaline batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Slide the battery cover back on to the remote control until the lock snaps. Using the remote control with a VCR or a cable TV converter To control a VCR: If you have a non-Toshiba VCR, program the remote control to recognize your VCR brand (see “Programming the remote control for use with a non-Toshiba VCR or a cable TV converter” on page 15). Set the TV/CABLE/VCR switch to the VCR position. The shaded buttons shown at right will then control the VCR. The unshaded buttons will operate the TV as usual. To control a cable TV converter: If you have a non-Toshiba cable TV converter, program the remote control to recognize your converter brand (see “Programming the remote control for use with a non-Toshiba VCR or a cable TV converter” on page 15). Set the TV/CABLE/VCR switch...

Descargar ahora

Introduzca dos números de la imagen: