Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD. • “BRAVIA” and are trademarks of Sony Corporation. • “XMB™” and “XrossMediaBar” are trademarks of Sony Corporation and Sony Computer Entertainment Inc. product. Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. Introduction Notice for Digital TV function About the model name in this manual The “xx” that appears on the model name, corresponds to two numeric digits related to design or colour variation. ~ • The illustrations used in this manual are of the KDL32EX402 unless otherwise stated. Location of the identification label Labels for Model No. and Power Supply rating (in accordance with applicable safety regulation) are located on the rear of the TV. 2GB Start-up Guide 4 Table of Contents Start-up Guide 4 Table of Contents9 Precautions......................................................................................................................10 i-MANUAL Navigating through the Instruction Manual ..................................................................11 Additional Information Installing the Accessories (Wall-Mount Bracket) .........................................................12 Specifications ..................................................................................................................15 Troubleshooting ..............................................................................................................18 : for digital channels only • Before operating the TV, please read “Safety Information” 9. Retain this manual for future reference. • Full operating instructions can be found on the screen. • Instructions about “Installing Wall Mount Bracket” are included within this TV’s instructions manual. 3 GB Start-up Guide Start-up Guide Checking the accessories Mains lead (1) (only for KDL-46EX4xx) Cable holder (1) (only for KDL-40/32NX5xx) Stand (1)* Screws for stand (4) (only for KDL-46EX4xx) Screws for stand (4 + 3) (only for KDL-40BX4/EX4xx, KDL-37EX4xx, KDL-32BX3/BX4/EX3/EX4xx, KDL26EX3xx, KDL-22EX3xx) Screws for stand (4 + 4) (only for KDL-40/32EX6xx, KDL-40/32NX5xx) Remote RM-ED022 (1) Remote RM-ED036 (1) (only for KDL-40/32EX6xx) Size AAA batteries (2) * Disassembled except for KDL-46EX4xx. To insert batteries into the remote (only for KDL-40/32EX6xx) ~ • Observe the correct polarity when inserting batteries. • Do not use different types of batteries together or mix old and new batteries. • Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority. • Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 2: Attaching the stand Follow the assembling steps required to place on a TV stand. 1 Refer to the supplied Table-Top Stand leaflet for proper attachment for some TV models. 2 Place the TV set on the stand. Take care not to interfere with cables. 3 Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws. Only for KDL-22EX3xx ~ • If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m (15 kgf·cm). 4 GB 3:3: Connecting an aerial/cable only Terrestrial signal or cable Coaxial cable Connecting an aerial/cable/VCR/DVD recorder with SCART Scart lead Coaxial cable Coaxial cable Terrestrial signal orcable VCR/DVD recorder ~ • AV1 outputs available only for analogue TV. • AV2 outputs to the current screen (except PC, HDMI, Component, USB). Connecting an aerial/cable/VCR/DVD recorder with HDMI Start-up HDMI cable Coaxial cable Coaxial cable Terrestrial signal or cable VCR/DVD recorder 4: Preventing the TV from toppling over 2 1 3 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. Continued 5 GB 6 GB 2 Install a machine screw (M4 . 16, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord. z • An optional Sony support belt kit is used to secure the TV. Contact your nearest Sony Service Centre to purchase a kit. Have your TV model name ready for reference. 5: Bundling the cables (only for KDL-40/32NX5xx) You can bundle the connecting cables as illustrated below. ~ • Do not bundle the mains lead with other connecting cables. 6: Selecting the language, country/region and location 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the side of the TV. When you turn on the TV for the first time, the Language menu appears on the screen. ~ • When you turn on the TV, the p...