|
Otros manuales para este modelo:
Resumen del manual
Only the options that can be operated are displayed. 20 GB Picture Adjustment menu Select: Set: Back: OK End: MENU Mode: Contrast: Brightness: Colour: Sharpness: Noise Reduction: Dynamic Picture: Colour Tone: Gamma Correction: Reset Custom 50 50 25 25 Auto On Cool 0 Picture Adjustment You can select the options listed below on the Picture Adjustment menu. To select options, see “Navigating through menus” (page 19). Tip When you set “Mode” to “Vivid” or “Standard”, you can adjust only “Mode”, “Contrast”, “Colour Tone”, “Noise Reduction” and “Reset”. Mode Selects the picture mode. 1 Press OK to select “Mode”. 2 Press M/m to select one of the following picture modes, then press OK. Vivid: For enhanced picture contrast and sharpness. Standard: For standard picture. Recommended for home entertainment. Custom: Allows you to store your preferred settings. Tip You can also change the picture mode by pressing repeatedly. Contrast/Brightness/Colour/Hue/Sharpness 1 Press OK to select the option. 2 Press , to set the level, then press OK. Tip “Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes). Colour Tone 1 Press OK to select “Colour Tone”. 2 Press M/m to select one of the following, then press OK. Cool: Gives the white colours a blue tint. Neutral: Gives the white colours a neutral tint. Warm: Gives the white colours a red tint. Using the Menu Continued 21 GB Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. 1 Press OK to select “Noise Reduction”. 2 Press M/m to select one of the following, then press OK. Auto: Automatically reduces the picture noise. High/Low/Off: Modifies the effect of the noise reduction. CNR: Reduces the picture noise when the animation image is received. BNR: Reduces the block picture noise. This is effective for connected DVD player/ digital satellite receiver with MPEG playback. Dynamic Picture Enhances the picture contrast. 1 Press OK to select “Dynamic Picture”. 2 Press M/m to select “On”, then press OK. Gamma Correction Reset Adjusts the balance between bright and dark areas of the picture. 1 Press OK to select “Gamma Correction”. 2 Press M/m to set the level, then press OK. Reset all the picture settings to the factory settings. 1 Press OK to select “Reset”. 2 Press M/m to select “OK”, then press OK. 22 GB Sound Adjustment menu Select: Set: Back: OK End: MENU Effect: Treble: Bass: Balance: Auto Volume: Dual Sound: Woofer Level: Volume: Dual Sound: Reset Dolby Virtual 0 0 0 On Stereo 50 50 Stereo Sound Adjustment You can select the options listed below on the Sound Adjustment menu. To select options, see “Navigating through menus” (page 19). Effect (sound effect) 1 Press OK to select “Effect”. 2 Press M/m to select one of the following sound effects, then press OK. Off: Flat response. Natural: Enhances clarity, detail, and sound presence by using “BBE High definition Sound System*1”. Dynamic: Intensifies clarity and sound presence for better intelligibility and musical realism by using the “BBE High Definition Sound System”. Dolby Virtual*2: Uses the TV speakers to simulate the surround effect produced by a multi channel system. Tips • You can also change sound effect by pressing 9 repeatedly. • If you set “Auto Volume” to “On”, “Dolby Virtual” is automatically set to “Natural”. *1 Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are trademarks of BBE Sound, Inc. *2 Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D are trademarks of Dolby Laboratories. Treble/Bass/Balance Auto Volume Adjusts higher-pitched sounds (Treble), adjusts lower-pitched sounds (Bass), and emphasizes left or right speaker balance (Balance). 1 Press OK to select the option. 2 Press , to set the level, then press OK. Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes). 1 Press OK to select “Auto Volume”. 2 Press M/m to select “On”, then press OK. Tip If you set “Effect” to “Dolby Virtual,” “Auto Volume” will automatically be switched to “Off”. Continued Using the Menu 23 GB Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. 1 Press OK to select “Dual Sound”. 2 Press M/m to select one of the following, then press OK. Stereo, Mono: For a stereo broadcast. A/B/Mono: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. Tip If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. Woofer Level Adjusts the output level of the built-in woofer of the TV. 1 Press OK to select “Woofer Level”. 2 Press , to set the level, then press OK. Volume (headphone volume) Adjusts the volume of the headphones. 1 Press OK to select “ Volume”. 2 Press , to set the level, then press OK. Dual Sound Selects the sound of the headphones for a stereo or bilingual broadcast. 1 Press OK to select “ Dual Sound”. 2 Press M/m to s...