Votos - 0, Puntuación media: 0
(
)
)
|
Fotos y especificaciones Sony KV-21CL1K |
Resumen del manual
1 Enter the Teletext number that you want to refer to, then press . 2 When the page number is displayed, press to show the Text. To switch off Teletext: Press . Fastext Fastext service lets you access pages with one push of a button. While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to access the corresponding page. Teletext Connecting Optional Equipment GB Using the following instructions, you can connect a wide range of optional equipment to your TV set (connecting cables are not supplied). AB1 2 C8mm/Hi8/ DVC camcorder DVD/VCR “PlayStation”* decoder When you connect the headphones, the TV speakers will automatically be muted * “PlayStation” is a product of Sony Computer Entertainment, Inc. * “PlayStation” is a trademark of Sony Computer Entertainment, Inc. Connecting a VCR: To connect a VCR, please refer to the section “Connecting an outdoor aerial and VCR” of this instruction manual. We recommend you connect your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual Programme Preset” option (for details on how to manually programme these presets, see page 14, step a). Refer to your VCR instruction manual to find out how to find the output channel of your VCR. Using Optional Equipment 1 Connect your equipment to the designated TV socket, as indicated above. 2 Switch on the connected equipment. 3 To watch the picture of the connected equipment, press repeatedly until the correct input symbol appears on the screen. Symbol Input Signals •Audio / video input signal through the Scart connector C 1 •RGB input signal through the Scart connector C. This symbol appears only if a RGB source has been connected. 1 •Video input signal through the phono socket A and Audio input signal 2 through B. 4 Press button on the remote control to return to the normal TV picture. Additional Information 17 Specifications TV system: Depending on your country selection: B/G/H, D/K Colour system: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel Coverage: VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 Picture Tube: Flat Display FD Trinitron Rear Terminals i1/ 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, TV audio/video output. Front Terminals t2 video input – phono jack 2 audio input – phono jacks headphones jack Sound Output: 2 x 6 W (music power) 2 x 3 W (RMS) Power Consumption: 66 W Standby Power Consumption: < 1 W Dimensions (w x h x d): Approx. 630 x 460 x 492 mm Weight: Approx. 25 kg Accessories supplied: 1 Remote Control (RM-W100) 2 Batteries (IEC designated) Other features: •Teletext, Fastext, TOPtext •Sleep Timer •On Timer Design and specifications are subject to change without notice. Ecological Paper- Totally Chlorine Free Additional Information Troubleshooting Here are some simple solutions to the problems which may affect the picture and sound. Problem Solution No picture (screen is dark) and no • Check the aerial connection. sound. • Plug the TV in and press the ! button on the front of TV. •If the standby indicator 1 is on, press &/1 button on the remote control. Poor or no picture (screen is dark), • Using the menu system, select the “Picture but good sound. Adjustment” menu and select “Reset” to return to the factory settings (see page 10). No picture or no menu information • Check that the optional equipment is on and press from equipment connected to the repeatedly on the remote control until the correct Scart connector. input symbol is displayed on the screen (see page 17). Good picture, no sound. • Press the + button on the remote control. •Check that headphones are not connected. No colour on colour programmes. • Using the menu system, select the “Picture Adjustment” menu and select “Reset” to return to factory settings (see page 10). GB Distorted picture when changing • Turn off any equipment connected to the Scart programmes or selecting teletext. connector on the rear of the TV. Wrong characters appear when viewing teletext. •Using the menu system, enter the “Language/ Country” option in the “Set Up” menu and select the country in which you operate the TV set. For Cyrillic languages, we recommend to select Russia in the case that your own country does not appear in the list (see page 15). Picture slanted. • Using the menu system, select the “Picture Rotation” option in the “Set Up” menu to correct the picture slant (see page 15). Noisy picture when viewing a TV • Using the menu system, select the “Manual channel. Programme Preset” menu and adjust Fine Tuning (AFT) to obtain better picture reception (see page 14). •Using the menu system, select the “Intelligent Picture” option in the “Picture” menu and select “On” to reduce the noise in the picture (see page 10). Remote control does not function. • Replace the batteries. The standby indicator ...