Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Do not place any objects on the TV. Do not plug in too many appliances to the same power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days. C Securing the TV B KV-TG21 only To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. Screw the band to the TV stand and to the provided hole at the rear of your TV. 20 mm 3.8 mm screws clamps band or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. Note • Use only the supplied screws. Use of other screws may damage the TV. D TV front and rear panels ! PROGR SELECT (MONO) L R L (MONO) R 8613479250qaqs TV front panel TV rear panel Button Function 1 ! Turn off or turn on the TV. 2 Remote control sensor. 3 1 Standby indicator. 3 Stereo/bilingual indicator. (KV-TG21M90 only) 3 Bilingual indicator. (KV-PG14M72 only) 3 Wake Up indicator. 4 PROGR +/– Select program number. 5 2 +/– * Adjust volume. 6 t Select TV or video input. 7 SELECT Select the desired item. 8 i Headphone terminal. (KV-TG21 only) 8 Earphone terminal. (KV-PG14 only) 9, qa t Video input terminal. 0 8 Antenna input terminal. qs T Monitor output terminal. * You can also use the 2 +/– buttons on the TV to work as the +/– buttons on the remote. . The R (audio input) jacks are available for KV-TG21 only. E Connecting optional components Connecting to the video input terminal ( t ) TV front panel Camcorder Audio/Video cable (not supplied) TV rear panel VCR Video game equipment Antenna cable (not supplied) (MONO) L R L (MONO) R Audio/Video cable (not supplied) . Note • Do not connect video equipment to t (video input) at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. Connecting to the monitor output terminal (T) VCR Audio systemAudio/Video cable (not supplied) TV rear panel L (MONO) R . The R (audio input) jacks are available for KV-TG21 only. F Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Symptom Solutions Snowy picture, noisy sound • Check the antenna cable and connection on the TV, VCR and on the wall. • Preset the channel manually again. (See J) • Check the antenna setup. Contact a Sony dealer for advice. Good picture, noisy sound • Select the appropriate TV system. (See J) • Press A/B until the sound is optimal. (KV-TG21M90 only) No picture,no sound • Check the power cord, antenna and the VCR connections. • Press ?/1 (power) or ! (main power) to turn on the TV. Good picture, no sound • Press 2 + to increase the volume level. • Press % to cancel the muting. Dotted lines or stripes • Do not use a hair dryer or other equipment near the TV. • Check the antenna setup. Contact a Sony dealer for advice. Double images or “ghosts” • Use the fine tuning ("FINE") function. (See J) • Turn off or disconnect the booster if it is in use. • Check the antenna setup. Contact a Sony dealer for advice. No color • Select the appropriate color system. (See J) • Adjust the color level. (See K) • Check the antenna setup. Contact a Sony dealer for advice. Abnormal color patches • Keep external speakers or other electrical equipment away from the TV. Press ! (main power) to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV. The 1 (standby) indicator on your TV flashes red several times after every three seconds. • Count the number of times the 1 (standby) indicator flashes. Press ! (main power) to turn off your TV. Contact your nearest Sony service center. TV cabinet creaks. • Changes in room temperature sometimes make the TV cabinet expand or contract, making a noise. This does not indicate a malfunction. A "boom" sound is heard when the TV is turned on. • The TV's demagnetizing function is working. This does not indicate a malfunction. G Specifications KV-TG21M90 KV-PG14M72 Note Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G, I, D/K, M Color system PAL, PAL 60, SECAM,NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual NICAM Bilingual B/G, I, D/K B/G, I, D/K; A2 Stereo/ Bilingual B/G Channel coverage B/G VHF : E2 to E12 UHF: E21 to E69 CATV : S01 to S03, S1 to S41 UHF : B21 to B68 CATV : S01 to S03, S1 to S41 D/K VHF: C1 to C12, R1 to R12 UHF : C13 to C57, R21 to R60 CATV : S01 to S03, S1 to S41, Z1 to Z39 M VHF : A2 to A13 UHF: A14 to A79 CATV : A-8 to A-2, A to W+4, W+6 to W+84 8 (Antenna) 75-ohm external terminal Audio output (Speaker) 3W + 3W 3W Number of terminal (Video) Input: 2* Output: 1 Phono jacks; 1 Vp-p, 75 ohms * One input line availabl...
Otros modelos de este manual:TV - KV-TG21M90 (370.7 kb)