Votos - 1, Puntuación media: 5 ( )

Fabricar: Philips Tamaño del archivo: 1.45 mb Nombre del archivo: Idioma del manual:

Connect You can connect this TV to your home network through a wired or wireless connection. . For a wired connection, see Connect your TV > Connect to a network and the Internet > Wired connection (Page 58). . For PFL42x8, see Connect your TV > Connect to a network and the Internet > Wi-Fi integrated (Page 59). . For PFL32x8, see Connect your TV > Connect to a network and the Internet > Wi-Fi ready (Page 58). Wired connection 1. Switch on the router and switch on its DHCP setting. 2. Connect the router to the TV with an Ethernet cable. 3. Press , then select [Setup]. 4. Select [Connect to network], then press OK. 5. Follow the onscreen instructions to install the network. 6. Wait for the TV to find the network connection. 7. If you are prompted, agree to the End User Licence Agreement. Wi-Fi ready This section is for PFL32x8 only. With the Philips wireless USB adapter PTA128 (sold separately), you can connect the TV to your home network wirelessly. Note: The wireless network operates in the same 2.4GHz frequency spectrum as common household devices, such as Dect phones, microwave ovens or Bluetooth devices, which can cause Wi-Fi interference. Move these devices away from the TV. . To reduce network traffic, switch off unused network equipment in the home network. . Reception quality depends on the location of the wireless router and the local Internet service provider. . When playing video over your wireless home network, we recommend that you use an IEEE 802.11 N router. The connection speed may differ according to the operating environment of your wireless home network. Start wireless setup 1. Switch on your wireless network router. 2. Connect the Philips USB adapter PTA128 to a USB connector on the TV. The wireless installation starts automatically. 3. Follow the onscreen instructions. Tip: Keep the wireless USB adapter connected to the TV. WPS - Wi-Fi Protected Setup 1. If your router supports Wi-Fi Protected Setup (WPS), press the WPS button on the router. 2. After 2 minutes, select [WPS] on the TV, then press OK. The TV connects to your network. This takes about 2 minutes. Most new wireless routers have the WPS system and carry the WPS logo. The WPS system uses WPS security encryption and cannot be combined with devices on your network that use the WEP security encryption. If you still need the WEP (Wired Equivalent Privacy) devices in your network, install with [Scan] > [Custom]. Scan for routers If you have several routers in your network, you can select the network you need. 1. To select a specific network router, press [Scan] on the first page of the installation. The routers with WPS and the strongest signal are shown first in the list on screen. 2. Select the router you need, then press OK. . If you are connecting to a WPS router, select [WPS] on the TV. . If you want to set the PIN code in your router software to connect, select [WPS pin]and note down the code. . To enter the encryption key manually, select [Standard], then enter the key when prompted. Set secured connection with WPS PIN 1. To set secured connection, select the [WPS pin] and press OK. 2. Write down the 8-digit PIN code shown on TV, then enter it into the router software on your PC. To find out where to enter the PIN code, read the router manual. Set secured connection with WPA encryption If you have WPA security on your router, enter the pass phrase with the remote control. 1. To enter the encryption key (the security key) manually, select [Standard], then press OK. 2. To access the onscreen keyboard, select the text entry field, then press OK. Set secured connection with WEP encryption If you have WEP security encryption, the TV asks for the WEP encryption key in hexadecimal numbers. 1. Locate the hexadecimal key in the router softwar...

Descargar ahora

Introduzca dos números de la imagen: