Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Select TV settings > Sound > Advanced > HD MI ARC. DVI to HDMI Use a DVI to HDMI adapter if your device only has a DVI connection. Us e one of the HDMI connections and add an Audio L/R cable (mini-jack 3.5 mm) to Audio In VGA/DVI for sound, on the back of the TV. Copy protection DVI and HDMI cables s upport HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection signal that prevents copying content from a DVD disc or Blu-ray Disc. Also referred to as DRM (Digital Rights Management). Y Pb Pr Component Video YPbPr is a high quality connection. The YPbPr connection can be used for High Definition (HD) TV signals. Next to the Y, Pb and Pr signals add the Audio Left and Right s ignals for s ound. Setting up / Connect devices 9 Use the supplied YPbPr adapter cable to connect your device. Match the YPbPr (green, blue, red) connector colours with the cable plugs when you connect. Use a Audio L/R cinch to mini-jack (3.5mm) adapter cable (not supplied) if your device also has sound. SCART SCART is a good quality connection. The SCART connection can be us ed for CVBS and RGB video s ignals but cannot be used for High Definition (HD) TV signals. The SCART connection combines video and audio s ignals . Use the supplied SCART adapter cable to connect your device. Audio Out -Optical Audio Out -Optical is a high quality sound connection. This optical connection can carry 5.1 audio channels. If your audio device, typically a Home Theatre Sys tem (HTS), has no HDMI ARC connection, you can connect this sound cable to an Audio In -Optical connection on the HTS. This Audio cable will send the s ound of the TV to the HTS. You can set the type of the audio out signal to fit the audiocapabilities of your Home Theatre Sys tem. In Help, press * List and look up Audio Out settings formore information. If the s ound does not match the video on screen, you can adjus t the audio to video s ynchronization. In Help, press * List and look up Audio to video sync for more information. VGA Use a VGA cable (D-sub 15 connector) to connect a computer to the TV. With the VGA connection you can use the TV as a computer monitor. You can add an Audio L/R cable for sound (mini-jack 3.5 mm). You can also connect your computer wirelessly, to watch the multi media files stored on your computer on your TV screen. In Help, press * List and look up Netwo rk, wireless for more information. EasyLink HDMI CEC HD MI CEC With EasyLink you can operate a connected device with the TV remote control. EasyLink uses HDMI CEC* to communicate with the connected devices . Devices mus t support HDMI CEC and must be connected with an HDMI connection. * Cons umer Electronics Control EasyLink setup The TV comes with EasyLink switched on. Make sure that all HDMI CEC settings are properly set up on the connected EasyLink devices. EasyLink might not work with devices from other brands. HD MI CEC on other brands The HDMI CEC functionality has different names on different brands. Some examples are: Anynet, Aquos Link, Bravia Theatre Sync, Kuro Link, Simplink and Viera Link. Not all brands are fully compatible with Eas yLink. Example HDMI CEC branding names are property of their res pective owners . 10 Setting up / Connect devices Operate devices To operate a device connected to HDMI and set up with EasyLink, select the device -or its activity-in the list of TV connections . Pres s c SOURCE, select a device connected to an HDMI connection and press OK. Once the device is s elected, the TV remote control can control the device. However the h (Home) and o OPTI ONS keys and some other typical TV keys, like Ambilight, are not forwarded to the device. If the key you need is not on the TV remote control, you can select the key in the Options menu. Press o OPTIONS and select % Controls in the menu bar. Select the device key you need on s creen and pres s OK. Some very s pecific device keys might not be available in the Controls menu. EasyLink settings The TV comes with all EasyLink settings switched on. You can switch off any EasyLink setting independently. EasyLink To switch off EasyLink completely, press h and select S Setup and press OK. Select TV settings > General settings > EasyLink > EasyLink. Select Of f and press OK. EasyLink Remote Control If you want devices to communicate but you don't want to operate them with the TV remote control, you can switch off EasyLink remote control separately. In the EasyLink settings menu, s elect EasyLink Remote Control and select Of f . Pixel Plus link Some devices , a DVD or Blu-ray Disc player, might have their own picture quality processing. To avoid bad picture quality caus ed by interference with the TV proces s ing, the picture proces sing of thes e devices s hould be dis abled. The TV comes with Pixel Plus link switched on and disables the picture quality proces sing of recent Philips devices connected to the TV. To switch off Pixel Plus link, in the EasyLink settings menu, select Pixel Plus link and select Of f . Aut...
Otros modelos de este manual:TV - 42PDL6907K/12 (2.65 mb)
TV - 47PFL6907K/12 (2.65 mb)
TV - 42PFL6907K/12 (2.65 mb)