Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
• The connected USB flash drives / devices must have at least 1 gigabytes (1gb) of free space and USB 2.0 compatibility. An error message will be displayed if these conditions are not met. • By default, recorded programs are stored on the connected USB flash drive / device. You may store these programs on a computer as well, although you can play them only on your TV. • The TV supports FAT32 and NTFS disk formatting but recording will not be available with NTFS formatted disks. Timeshift recording Press PAUSE while watching a broadcast to activate timeshifting mode. • In timeshifting mode, the program is paused and simultaneously recorded to the connected USB disk. • Press (PLAY) button again to resume the paused program from where you stopped. Press the STOP button to stop timeshift recording and return to the live broadcast. Note: Time shift cannot be used while in radio mode. Note:You cannot use the time shift fast reverse feature before advancing the playback with the fast forward option. Instant recording Press button to start recording an event instantly while watching a program. You can press button on the remote control again to record the next event on the EPG. In this case, an OSD will be displayed, indicating the programed events for recording. Press (STOP) button to cancel instant recording. Note:You cannot switch broadcasts or view the Media Browser during the recording mode. While recording a program or during the time shifting, a warning message appears on the screen if your USB device speed is not sufficient. Watch recorded programs Select the Recordings library from the Media browser menu. Select a recorded item from the list (if previously recorded). Press the OK button to view the Play options. Select an option then press OK button. Note: Viewing main menu and menu items will not be available during the playback. Press the (STOP) button to stop a playback and return to the Recordings Library. Slow forward If you press (PAUSE) button while watching recorded programs, the slow forward feature will be available. You can use button to slow forward. Pressing button consecutively will change slow forwarding speed. Change TV settings To access the options listed below; 1. Press the Menu button 2. Highlight your selection 3. Press OK to confirm Display options Mode: Changes the picture mode to one of the following: Cinema, Game, Sport, Dynamic and Natural. English - 4 Contrast: Sets the light and dark values of the image. Brightness: Sets the brightness value of the image. Sharpness: Sets the sharpness value. A high sharpness value may result in a clearer, crisper image depending on the content. Color: Sets the color value. Backlight: Controls the brightness of the backlight. Noise reduction: Reduces the noise level in the image. Sound options Volume: Adjusts volume level. Equalizer: Changes the equalizer mode. Balance: Adjusts whether the sound is coming mainly from the right or left speakers. Headphone: Sets headphone volume. Sound mode: Sets the preferred sound mode. AVL: Sets a limit to maximum volume output. Headphone/Lineout: This option is set to headphone if you have headphones or lineout if you have external amplifier connected to the headphone jack. Dynamic bass: Enables or disables the Dynamic Bass. Increases the range of bass. Surround sound: Surround sound mode can be changed as On or Off. Digital Out: Sets digital out audio type. Configuring parental settings This feature is for restricting access to selected content. It is controlled by a pin number defined by you. Factory defa.lt is “0000”. Menu lock (optional): Menu lock setting enables or disables the menu access. Maturity lock (optional): When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast. Child lock (optional): When Child Lock is set, the TV can only be controlled by the remote control. In this case the control panel buttons will not work. Set PIN: Defines a new PIN number. Note: If the Country option is set to France, you can use 4725 as the default code. Electronic program guide (EPG) Some, but not all channels send information about the current and next programs. Press the “ ” button to view the EPG menu. Up/Down/Left/Right: Navigate EPG. OK: Displays program options. English INFO: Displays, in detailed, information on the program selected. GREEN: Switches to List Schedule EPG. YELLOW: Switches to Timeline Schedule EPG. BLUE: Displays filtering options. : The TV will start to record the selected program. You can press again to stop the recording. Program options In EPG menu, press the OK button to enter the Event Options menu. Select Channel In EPG menu, using this option, you can switch to the selected channel. Record / Delete record timer After you have selected a program in the EPG menu, press OK. Select the Record option and press OK. After this operation, a recording will be scheduled for the selected program. Set Timer / Delet...