Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Up direction 2. Down direction 3. Programme/Volume / AV / Standby-On selection switch Note:You can move the switch, upward or downward to change the volume. If you want to change channels, press the middle of the switch once (Position 3) and then move upward or downward. If you press the middle of the switch once more, source OSD will be displayed. If you press the middle of the switch and hold about a few seconds, the TV will switch to standby mode. Main menu OSD cannot be displayed via control buttons. Operation with the Remote Control • Press “ ” button on your remote control to display main menu screen. Use Left or Right button to select a menu tab and press OK to enter. Use Left / Right / Up / Down to select or set an item. Press “ ” or “ ” button to quit a menu screen. • Once you have connected external systems to your TV, you can switch to different input sources. Press SOURCE button on your remote control consecutively to select the different sources. • You can change the channel and adjust the volume by using the +/- and CH+/- buttons on the remote. . General Operation Installing the Batteries to the Remote Lift the cover on the back of the remote upward gently. Install two AAA batteries. Make sure to match the + and - ends of the batteries in the battery compartment (observe the correct polarity. Replace the cover. Connect Power & Antenna/Cable IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Plug the power cable to the mains socket outlet. .......... .......... ...... ................ Accessories included • Remote Control • Batteries: 2 x AAA • Instruction Book • Quick Start Guide • Side AV Connection Cable • YPbPr Connection Cable Contents TV Control switch & Operation.............................. 16 General Operation................................................. 16 TV Menu Features and Functions......................... 21 Specifications...............................................................28 Viewing remote control 1. Standby 2. Stop (in Media Browser mode) 3. Play (in Media Browser mode) / Play-Slideshow (in Media Browser) 4. Rapid reverse (in Media Browser mode) 5. AV / Source selection 6. TV 7. Electronic programme guide(in DVB channels) 8. Navigation buttons (Up/Down/Left/Right) 9. Programme recording 10. Programme Down / Page up 11. Mute 12. Volume Down 13. Green button / List Schedule (in EPG) / Tag/ Untag All (in favourite list) 14. Red button 15. Numeric buttons 16. Subtitle on-off (in DVB channels) 17. Teletext / Mix (in TXT mode) 18. Blue button/Edit Channel List/Filter (in Favourite List&EPG) 19. Yellow button/Timeline Schedule(in EPG) 20. Volume Up 21. Programme Up / Page down 22. Back/ Return / Index page (in TXT mode) 23. Mono/Stereo - Dual I-II / Current Language (*) (in DVB channels) 24. Okay (Confi rm) / Hold (in TXT mode) / Channel List 25. Info / Reveal (in TXT mode) 26. Menu on-off / Exit (in Media Browser mode) 27. Picture zoom 28. Rapid advance (in Media Browser mode) 29. Pause (in Media Browser mode) / Timeshift recording Teletext Press TEXT button to enter. Press again to activate mix mode. Press once more to exit. Follow the instructions displayed on digital teletext screen. Digital Teletext (for UK only) Press TEXT button to view digital teletext information. Operate it with the coloured buttons, cursor buttons and OK button. The operation method may differ depending on the contents of the digital teletext. Follow the instructions displayed on digital teletext screen. English - 17 English - 18 - Viewing the Connections NOTE: When connecting a device via the YPbPr or Side AV input, you must use the supplied connection cables to enable connection. See the illustrations above. | To enable PC audio, you will need to use the supplied SIDE AV CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. Connector Type Cables Device Scart Connection (back) VGA Connection (back) SIDE AV PC/YPbPr Audio Connection (side) Side Audio/Video Connection Cable (Supplied) PC Audio Cable (Not supplied) HDMI Connection (back) SPDIFF Connection (back) SIDE AV Side AV Connection (side) AV Connection Cable (supplied) HEADPHONE Headphone Connection (side) YPBPR YPbPr Video Connection (side) YPbPr Connection Cable (supplied) USB Connection (side) CI Connection (side) ........ ............ Switching On/Off Switching On/Off To Switch the TV On • Connect the p...