Votos - 3, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones Sony KDL-37W5500 |
Resumen del manual
1 Digit Direct When “1 Digit Direct” is set to “On”, you can select an analogue channel using one preset number button (0 – 9) on the remote. ~ • When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above by entering two digits on the remote. Favourite Set-up Adds channels in a Favourite list. To reset the favourite channels, select “– – –”. Auto Tuning Tunes in all the available analogue channels. You can retune the TV after moving house, or to search for newly launched channels. 40 GB Programme Sorting Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for the channel, then press Programme Sorting Changes the order of analogue channels stored in the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for the channel, then press . Programme Labels Assigns a channel name of your choice, up to five letters or numbers. The name appears briefly on the screen when you select the channel. (Names for channels are usually taken automatically from Text (if available).) 1 Press F/f to select the channel you want to name, then press . 2 Press F/f to select the desired letter or number (“_” for a blank space), then press g. If you enter a wrong character Press G/g to select the wrong character. Then, press F/f to select the correct character. 3 Repeat step 2 until you finish entering the name. 4 Press to exit the labeling procedure. Intelligent Picture On with Indicator Automatically reduces the picture noise. The signal level bar is displayed when the channel is changed or the display is changed from an input screen to a TV programme. On Automatically reduces the picture noise. Off Turns off the “Intelligent Picture” feature. Manual Programme To preset a channel, press PROG +/– to select the programme number, before Preset selecting “Label”, “AFT”, “Audio Filter”, “Skip”, “Decoder”, or “LNA”. You cannot select a programme number that is set to “Skip” (page 42). Programme/ Allows you to preset programme channels manually. System/Channel 1 Press F/f to select “Programme”, then press . 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press . 3 Press F/f to select “System”, then press . 4 Press F/f to select one of the following TV broadcast systems, then press . B/G: For western European countries/areas I: For the United Kingdom D/K: For eastern European countries/areas L: For France 5 Press F/f to select “Channel”, then press . 6 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g. 7 Tune the channels as follows: If you do not know the channel number (Frequency) Press F/f to search for the next available channel. The search stops when a channel is found. To continue searching, press F/f. If you know the channel number (Frequency) Press the number buttons to enter the channel number of the broadcast you want to tune, or the channel number of your VCR. 8 Press to jump to “Confirm”, then press . Repeat the above procedure to preset other channels manually. Using Menu Functions (Continued) 41 GB Label Assigns a name of your choice to the selected channel. This name appears briefly on the screen when you select the channel. To input characters, follow steps 2 to 4 in “Programme Labe...
Otros modelos de este manual:TV - KDL-32E5500 (6.41 mb)
TV - KDL-32E5510 (6.41 mb)
TV - KDL-32E5520 (6.41 mb)
TV - KDL-40E5500 (6.41 mb)