Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
To avoid material degradation or screen coating degradation, observe the following precautions. • To remove dust from the screen surface/cabinet, wipe gently with a soft cloth. If dust is persistent, wipe with a soft cloth slightly moistened with a diluted mild detergent solution. • Never use any type of abrasive pad, alkaline/acid cleaner, scouring powder, or volatile solvent, such as alcohol, benzene, thinner or insecticide. Using such materials or maintaining prolonged contact with rubber or vinyl materials may result in damage to the screen surface and cabinet material. • When adjusting the angle of the TV set, move it slowly so as to prevent the TV set from moving or slipping off from its table stand Optional Equipment Keep optional components or any equipment emitting electromagnetic radiation away from the TV set. Otherwise picture distortion and/or noisy sound may occur. 9 GB Overview of the remote 1 "/1 – TV standby Switches the TV on and off from standby mode. 2 A/B – Dual Sound (page 23) 3 Coloured buttons • In digital mode (page 15, 17): Selects the options at the bottom of the Favourite and EPG digital menus. • In Analogue Text mode (page 13): Used for Fastext. 4 / – Info / Text reveal • In digital mode: Displays brief details of the programme currently being watched. • In analogue mode: Displays information such as current channel number and screen format. • In Analogue Text mode: Reveals hidden information (e.g., answers to a quiz). 5 F/f/G/g/ (page 12, 19) 6 TOOLS (page 14, 18, 36) Enables you to access various viewing options and change/make adjustments according to the source and screen format. 7 MENU (page 19) 8 DIGITAL – Digital mode (page 12) 9 Number buttons • In TV mode: Selects channels. For channel numbers 10 and above, enter the second or third digit within two seconds. • In Analogue Text mode: Enters the three digit page number to select the page. 0 – Previous channel Returns to the previous channel watched (for more than five seconds). qa PROG +/- (page 12) • In TV mode: Selects the next (+) or previous (-) channel. • In Analogue Text mode: Selects the next (+) or previous (-) page. qs 2 +/- – Volume qd % – Mute (page 12) qf / – Text (page 13) qg ANALOG – Analogue mode (page 12) qh / RETURN Returns to the previous screen of any displayed menu. qj – EPG (Digital Electronic Programme Guide) (page 15) qk – Picture freeze (page 13) Freezes the TV picture. ql – Screen mode (page 13) Changes the screen format when repeatedly pressed (displays the current screen format when pressed only once). w; / – Input select / Text hold • In TV mode (page 18): Selects the input source from equipment connected to the TV sockets. • In Analogue Text mode: Holds the current page. Tip The A/B, PROG + and number 5 buttons have tactile dots. Use the tactile dots as references when operating the TV. 10 GB Overview of the TV buttons and indicators 1 (page 19) 2 / – Input select/OK • In TV mode (page 18): Selects the input source from equipment connected to the TV sockets. • In TV menu: Selects the menu or option, and confirm the setting. 3 2 +/-/ / • Increases (+) or decreases (-) the volume. • In TV menu: Moves through the options left ( ) or right ( ). 4 PROG +/-/ / • In TV mode: Selects the next (+) or previous (-) channel. • In TV menu: Moves through the options up ( ) or down ( ). 5 1 – Power Switches the TV on or off. 6 – Timer REC programme/Picture Off/ Timer indicator • Lights up in orange when the Timer recording is set (page 15, 16). • Lights up in green when the picture is switched off (page 26). • Lights up in orange when the timer is set (page 25). 7 1 – Standby indicator Lights up in red when the TV is in standby mode. 8 " – Power indicator Lights up in green when the TV is switched on. 9 Remote control sensor/Light sensor (page 26) • Receives IR signals from the remote. • Do not put anything over the sensor, as its function may be affected. Note Make sure that the TV is completely switched off before unplugging the mains lead. Unplugging the mains lead while the TV is turned on may cause the indicator to remain lit or may cause the TV to malfunction. 6789 11 GB Watching TV Watching TV 1 2 3 3 1 Press 1 on the TV (top side) to switch on the TV. When the TV is in standby mode (the 1 (standby) indicator on the TV (front) is red), press "/1 on the remote to switch on the TV. 2 Press DIGITAL to switch to digital mode or ANALOG to switch to analogue mode. The channels available vary depending on the mode. 3 Press the number buttons or PROG +/- to select a TV channel. To select channel numbers 10 and above using the number buttons, enter the second and third digits within two seconds. To select a digital channel using the Digital Electronic Programme Guide (EPG), see page 15. In digital mode An information banner appears briefly. The following icons may be indicated on the banner. : Interactive service is available (Digital Text) : Radio service : Scrambled/Subscription service : Multiple audio lang...
Otros modelos de este manual:TV - KDL-40T3500 (6.56 mb)
TV - KDL-46T3500 (6.56 mb)