Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Good picture, no sound • Press 2 + to increase the volume level or press to cancel the muting. Dotted lines or stripes • Do not use a hair dryer or other equipment near the TV. • Check the antenna setup. Double images or “ghosts” • Use the fine tuning (“Fine”) function (see M). • Check the antenna setup or use a highly directional antenna. • Turn off or disconnect any external booster in use. No color • Adjust the “Color” level from “Picture Adjustment” (see K). • Select the appropriate “Color System” (see N). • Check the antenna setup. Picture slant • Keep external speakers or other electrical equipment away from the TV. • Adjust the “Picture Rotation” or “Picture V-Position” (see N). Abnormal color patches • Keep external speakers or other equipment away from the TV. Do not move the TV while the TV is turned on. Press 1 (main power) on the TV to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV. Teletext display is incomplete (snowy picture or double images). • Check the antenna setup and other connections. • Set the “Signal Booster” to “Auto” (see M) or try using an external booster. • Use the fine tuning (“Fine”) function (see M). Troubleshooting (continued) TV cannot receive stereo broadcast sound or stereo broadcast sound switches on and off or is distorted. • Check the antenna setup and other connections. TV cannot receive FM radio station. • Connect a separate FM antenna and the TV channel source through an antenna selector (switch) to your TV (see F). The 1 (standby) indicator on your TV flashes red several times after every three seconds. • Count the number of times the 1 (standby) indicator flashes. Press 1 on the TV to turn it off, disconnnect the AC power cord and inform your dealer or Sony service center of how the indicator flashes (duration and interval). The TV screen sometimes goes blank for slightly longer than usual during channel change. • The “Signal Booster” is functioning to detect a weak signal. This does not indicate a malfunction. TV cabinet creaks. • Changes in room temperature sometimes make the TV cabinet expand or contract, causing a noise. This does not indicate a malfunction. A small “boom” sound is heard when the TV is turned on. • The TV’s demagnetizing function is working. This does not indicate a malfunction. J WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode and “Settings” menu. Confirm End Picture Color Temperature: Cool Picture Adjustment Picture Mode: Vivid VM: High Intelligent Picture: On Signal Level Indicator: On Select 01 02 03 04 05 TV ConfirmSelect End External Inputs ConfirmSelect End Video 11 2 DVD Video 2 ConfirmSelect WEGA GATE Settings External Inputs FM Radio TV Preset 1: ---.-Please setup FM Radio FM Radio Select Preset 1-9 Search ExitFine “TV” “External Inputs” “FM Radio” “Settings” watch the preset TV channels (see E) select the inputs for the connected equipment (see F) listen to the FM radio (see H) change the settings of your TV (see K, L, M, N) How to use WEGA GATE WEGA GATE Settings External Inputs FM Radio TV Select Confirm TV 01 02 03 04 05 Select Confirm End (or b) to confirm your selection the WEGA GATE menu. or go to the next level. (1) Press WEGA GATE to display or cancel (2) Press 01 02 03 04 05 TV ConfirmSelect End ConfirmSelect WEGA GATE Settings External Inputs FM Radio TV (3) Press V or v to select the desired item. (4) Press RETURN to move to the previous level. • When a feature is dimmed in the menu, it is not selectable. • The WEGA GATE, buttons on the front panel can also be used for and , , , the operations above. K “Picture” setting Picture Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( ) is selected, then press . Color Temperature: Cool Picture Adjustment Picture Mode: Vivid VM: High Intelligent Picture: On Signal Level Indicator: On Select End Confirm “Picture Mode” Choose either “Vivid” (bright, contrast and sharp), “Standard” (normal) or “Custom”*. “Color Temperature” Adjust white color tint. Choose either “Cool” (blue tint), “Neutral” (neutral tint) or “Warm” (red tint). “VM” Sharpen the edges of each object. (Velocity Modulation) Choose either “High”, “Low” or “Off”. “Intelligent Picture” Optimize picture quality. Press V or v to select “On”, then press . To cancel, select “Off”, then press . “Signal Level Indicator” Display the signal level when the “Intelligent Picture” is functioning. “Intelligent Picture Signal Level” indicator will be displayed, followed by picture improvement when you change the program number or the input mode. red amber green (weak) (average)(fair ................. good) Press V or v to select “On”, then press . To cancel, select “Off”, then press . “Intelligent Picture” is still functioning. * You can adjust the setting to your personal preference in the “Picture Adjustment”, “Color Temperature” and “VM” options only when the “Custom” mode is selected. “Picture” set...
Otros modelos de este manual:TV - KV-SZ252M91 (1.33 mb)