Votos - 2, Puntuación media: 3 ( )

Fabricar: Sony Tamaño del archivo: 6.6 mb Nombre del archivo: Idioma del manual:

Fotos y especificaciones  Sony  KDL-52W4000

“Speaker”: Turns on/off the TV’s internal speakers. • “TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound through the TV speakers. • “Audio System”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. When connected with “Control for HDMI” compatible equipment, you can turn the connected equipment on interlocked with the TV. This setting must be made after connecting the equipment. “Audio Out”: • “Variable”: The audio output from your audio system can be controlled by the TV’s remote. • “Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume control to adjust the volume (and other audio settings) through your audio system. z “Audio Out” is not available for audio system connected to the TV using the HDMI sockets. Using 27 GB HDMI Set-up This is used to set the “Control for HDMI” compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected “Control for HDMI” compatible equipment side. “Control for HDMI”: This sets whether to interlock the “Control for HDMI” compatible equipment and the TV. When set to “On”, the following menu items can be performed. However, power consumption in standby mode is higher than usual. “Auto Devices Off”: When this is set to “On”, the “Control for HDMI” compatible equipment turn on and off interlocked with the TV. “Auto TV On”: When this is set to “On” and if the connected HDMI, control compatible equipment is turned on, the TV automatically turns on, and the displays the HDMI input from the connected equipment. “Device List Update”: Creates or updates the “HDMI Device List”. Up to 14 “Control for HDMI” compatible equipment can be connected, and up to 4 equipment can be connected to a single socket. Be sure to update the “HDMI Device List” when you change the “Control for HDMI” compatible equipment connections or settings. Select them manually one by one until getting a correct picture for several seconds. “HDMI Device List”: Displays the connected “Control for HDMI” compatible equipments. Product Information Displays your TV’s product information. All Reset Resets all settings to the factory settings and then displays the “Auto Start-up” screen. z • Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any buttons. • All settings, including Digital Favourite list, country/region, language, auto tuned channels, etc. will be reset. Analogue Set-up Programme List Select “Off” to hide the list of analogue channels from the XMB™ (Xross Media Bar). Display Auto Tuning Tunes in all the available analogue channels. This option allows you to retune the TV after moving house, or to search for new channels that have been launched by broadcasters. Programme Sorting Changes the order in which the analogue channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press . 2 Press F/f to select the new position for your channel, then press . Manual Programme Preset Before selecting “Label/AFT/Audio Filter/LNA/Skip/Decoder”, press PROG +/– to select the programme number with the channel. You cannot select a programme number that is set to “Skip” (page 27). Programme/System/Channel Presets programme channels manually. 1 Press F/f to select “Programme”, then press . 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR/ DVD recorder, select channel 00), then press RETURN. 3 Press F/f to select “System”, then press . 28 GB 4 Press F/f to select one of the following TV broadcast systems, then press RETURN. B/G: For western European countries/regions I: For the United Kingdom D/K: For eastern European countries/regions L: For France 5 Press F/f to select “Channel”, then press . 6 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g. 7 Tune the channels as follows: If you do not know the channel number (frequency) Press F/f to search for the next available channel. When a channel has been found, the search will stop. To continue searching, press F/f. If you know the channel number (frequency) Press the number buttons to enter the channel number of the broadcast you want or your VCR/ DVD recorder channel number. 8 Press to jump to “Confirm”, then press . 9 Press f to select “OK”, then press . Repeat the procedure above to preset other channels manually. Label Assigns a name of your choice, up to five letters or numbers, to the selected channel. This name will be displayed briefly on the screen when the channel is selected. To input characters, follow steps 1 to 3 of “Edit:” (page 27). AFT Allows you to fine-tune the selected programme number manually if you feel that a slight tuning adjustment will improve the picture quality. You can adjust the fine tuning over a range of –15 to +15. When “On” is selected, the fine tuning is performed automatically...

Descargar ahora

Introduzca dos números de la imagen: