Votos - 2, Puntuación media: 4.5
(
)
)
|
Fotos y especificaciones Sony KV-BT21M80 |
Resumen del manual
(1) Select "Video Input" and press (jf). Press V or V to select the input you want to label, then press (+). (2) Select "Label" and press (jf), then press V or V to select the label options: "Video 1/Video 2", "VCR", "SAT", "Game" or "Edit"*. * You may edit the video label by entering alphanumeric characters. "Color System" select the color system. Press V or V to select either "Auto", "PAL", "SECAM", "NTSC3.58" or "NTSC4.43", then press (jf). Normally, set this to "Auto". P Setup IAI Language: English J> Video Label Ü a Color System: Auto Select Confirm E End US Menu Adjustment 19 Additional Information ■ Connecting optional components Connecting to the video input terminal ( t ) TV front panel KV-BT21M80 KV-BM21M70* )■* KMONOV^mMONO) Audio/Video cable . (not supplied) ■ ^----+ TV rear panel KV-BT21M80 -01 (MONO) L I > I R <11^ KV-BM21M70* © (MONO) I * I (MONO) Ô- Camcorder Video game equipment Antenna cable (not supplied) ---- Audio/Video cable (not supplied) ----+ VCR * Sound Mix Terminal (KV-BM21M70 only) You can connect the audio L and R jacks from your AV equipment to both ^ (MONO) jacks on the TV to enjoy mixed left and right sound. If you do not prefer the mixed sound, disconnect either one of the Jy (MONO) jacks. Note • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see page 18). Connecting to the monitor output terminal ( T ) TV rear panel 20 Additional Information L(MONO^ft.-R ■ Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Troubleshooting guide Symptom Possible cause Solutions Page Snow § y picture • The connection is loose or the cable is damaged. • Check the antenna cable and connection on the TV, VCR and at the wall. 20 ôÿpi • The antenna setup is inappropriate. • Check the antenna setup. Contact a Sony dealer for advice. - Noisy □0 sound • Channel presetting is inappropriate or incomplete. • Display the "Channel Setup" menu and select "Manual Program" to preset the channel again. 18 • Signal transmission is low. • Try using a booster. - Distorted picture • Broadcast signals are too strong. • Turn off or disconnect the booster if it is in use. % Noisy □c sound Good picture • The TV system setting is inappropriate. • Display the "Channel Setup" menu and select the appropriate "TV System". 18 Noisy □d sound No picture No sound DÛX • The power cord, antenna or VCR is not connected. • Check the power cord, antenna and VCR connections. 20 • The TV is not turned on. • Press 1/1 (power). • Press ® (main power) on the TV to turn off the TV for about five seconds, then turn it on again. 9 8 continue Additional Information 21 continued Symptom Possible cause Solutions Page Good picture No sound DflX • The volume level is too low. • Press 2 + to increase the volume level. 9 • The sound is muted. • Press n^< to cancel the muting. 9 Dotted lines or stripes • There is local interference from cars, neon signs, hair dryers, power generators, etc. • Do not use a hair dryer or other equipment near the TV. • Check the antenna setup. Contact a Sony dealer for advice. - Double images < "ghosts" r • Broadcast signals are reflected by nearby mountains or buildings. • Use a highly directional antenna. • Use the fine tuning ("Fine") function. 18 • The antenna setup is inappropriate. • Check the antenna setup. Contact a Sony dealer for advice. - • Use of a booster is inappropriate. • Turn off or disconnect the booster if it is in use. - No color • The color level setting is too low. • Display the "Picture" menu and select "Personal" of "Mode", then adjust the "Color" level in "Picture Adjustment". 14 • The color system setting is inappropriate. • Display the "Setup" menu and check the "Color System" setting (usually set this to "Auto"). 19 • The antenna setup is inappropriate. • Check the antenna setup. Contact a Sony dealer for advice. - Picture slant • The magnetic disturbance from external speakers or other equipment, or the direction of the earth's magnetic field may affect the TV. • Keep external speakers or other electrical equipment away from the TV. 22 Additional Information Symptom Possible cause Solutions Page Abnormal color patches • The magnetic disturbance from external speakers or other equipment, or the direction of the earth's magnetic field may affect the TV. • Keep external speakers or other equipment away from the TV. Do not move the TV while the TV is turned on. Press ® (main power) on the TV to turn off the TV for about 15 minutes, then turn it on again to demagnetize the TV. The 1 (standby) indicator on your TV flashes red several times after every three seconds. • Your TV's selfdiagnosis function indicates the possible problems. • Count the number of times the 1 (standby) indicator flash...
Otros modelos de este manual:TV - KV-BM21M70 (666.42 kb)