Votos - 4, Puntuación media: 5
(
)
)
|
Fotos y especificaciones Sony KDL-52W4500 |
Resumen del manual
Please consult your local authority. • Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 1: Attaching the stand (for KDL-46W4500/ KDL-40W4500) 1 Open the carton box and take out the stand and the screws. 2 Place the TV set on the stand. Take care not to interfere with cables. 3 Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws. ~ • If using an electric screwdriver, set the tightening torque at approximately 1.5 N·m {15 kgf·cm}. 4 GB 5 GB Start-up Guide 2: Connecting an aerial/Set Top Box/recorder (e.g. DVD recorder) Connecting a Set Top Box/recorder (e.g. DVD recorder) with SCART Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI 3: Preventing the TV from toppling over 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M6 x 12, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord. 4: Bundling the cables ~ • Do not bundle the mains lead together with other cables. ( SMARTLINK ) A V 2 Set Top Box/recorder (e.g. DVD recorder) Scart lead Set Top Box/recorder (e.g. DVD recorder) 2 3 4 1 4 Press F/f to select the country in which 5: Performing the initial set-you will operate the TV, then press . up United Kingdom Ireland Nederland Select country Belgie/Belgique Luxembourg France Italia Country If the country in which you want to use the TV does not appear in the list, select “-” instead of a country. 5 Press F/f to select the location type in which you will operate the TV, then press . ~ • Select “Home” for the best TV settings to use the TV in the home. 2 1 3-11 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the TV. When you switch on the TV for the first time, the language menu appears on the screen. 3 Press F/f/G/g to select the language displayed on the menu screens, then press . CeskyMagyar РусскийББлгарскиSuomi Dansk Svenska Norsk SlovencinaRomanaEnglish Neder ands Franca s Ita ano Deu sch Turkce Espano Catala Portugues Po sk Language Location Home Select location. Shop 6 Select “Yes” then press . Auto Tuning Yes No Do you want to start Auto Tuning? 7 Press F/f to select “Antenna” or “Cable”, then press . If you select “Cable”, the screen for selecting the scan type appears. See “To tune the TV for Cable connection” (page 7). The TV starts searching for all available digital channels, followed by all available analogue channels. This may take some time, so do not press any buttons on the TV or remote while proceeding. 6 GB If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial/cable connection and then press to start auto- tuning again. 8 When the “Programme Sorting” menu appears on the screen, follow the steps of “Programme Sorting” (page 42). If you do not change the order in which the analogue channels are stored on the TV, press RETURN to go to step 9. 9 Quick Start Yes No Do you want to enable Quick Start? TV turns on more quickly but standby power consumption is increased. For details, see page 37. 10 Control for HDMI Yes No Do you want to enable control for compatib e HDMI devices? Choosing "Yes" will increase standby power consumption. For details, see page 29. Following this step, GUIDE Plus+ setting screen appears only when GUIDE Plus+ is available. 11 Press . The TV has now tuned in all the available channels. ~ • When a digital broadcast channel cannot be received, or when selecting a country in which there are no digital broadcasts in step 4, the time must be set after performing step 8. To tune the TV for Cable connection 1 Press . 2 Press F/f to select “Quick Scan” or “Full Scan”, then press . “Quick Scan”: channels are tuned according to the cable operator information within the broadcast signal. Recommended setting for “Frequency”, “Network ID” and “Symbol Rate” is “Auto.” This option is recommended for fast tuning when supported by your cable operator. If the “Quick Scan” does not tune, please use the “Full Scan” method below. “Full Scan”: All available channels are tuned and stored. This procedure may take some time. This option is recommended when “Quick Scan” is not supported by your cable provider. For further information about supported cable providers, refer to support web site: DVBC/ 3 Press f to select “Start”, then press . The TV starts searching for channels. Do not press any buttons on the TV or remote. ~ • Some cable providers do not support “Quick Scan.” If no channels are detected using “Quick Scan”, perform “Full Scan.” To set-up GUIDE Plus+ system (only when GUIDE Plus+ system is available)* * Condition you can set-up this feature: – in UK, Italy, Germany or Spain. – you can receive digital broadcasting. – when “Antenna” i...
Otros modelos de este manual:TV - KDL-40W4500 (5.24 mb)
TV - KDL-46W4500 (5.24 mb)