Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
System Displays the current software version and the signal level. Information Time Zone Allows you to manually select the time zone you are in, if it is not the same as the default time zone setting for your country/ area. Auto DST Select “On” to automatically switch between summer time and winter time according to the calendar. Service Select “On” to automatically change the channel when Replacement broadcaster changes transmission of the viewing programme to a different channel. Using Menu Functions Programme You can switch GUIDE (Sony Guide or GUIDE Plus+). If Guide (only when you change Sony Guide to GUIDE Plus+ programme, go to GUIDE Plus+ is (page 17, 20). available) 43 GB CA Module Set-up Provides access to a pay TV service after you obtain a Conditional Access Module (CAM) and a view card. See the location of the (PCMCIA) socket (page 22). Network Settings Network IP Address Manual Settings Allows you to set the network settings according to your network environment. DHCP (DNS manual) Automatically acquires the network settings except for DNS server settings. You can manually set the DNS settings. Test IP Address/ Subnet Mask/ Default Gateway/ Primary DNS/ Secondary DNS DHCP (DNS automatic) Automatically acquires the network settings through the Dynamic Host Configuration Protocol server function of the router or Internet service provider. Diagnoses whether the network is correctly connected. You need to configure each item when “Manual” is selected in “IP Address Settings”. When “DHCP (DNS manual)” is selected, be sure to enter “Primary DNS” and “Secondary DNS” server addresses manually. MAC Address Displays the “MAC address”, which is a fixed, globally unique identifier of the network device. Server Display Displays the connected server list and allows you to select the server you want to Settings display on the Home Menu. Server Diagnostics Diagnoses whether the TV can connect to each server on the home network. Renderer Function Enables playback of photo/music/video files on the TV through other control devices on the network, such as a digital still camera or mobile phone. Renderer Access Allows you to specify the accessible controller to the TV. When this setting is set Control to “On”, you can playback Photo/Music/Video files on the TV using the controller. Renderer Set-up Automatic Allows you to select whether to permit access to the TV Access automatically when a network device accesses the TV for the Permission first time. Renderer Name Allows you to set the name of the TV to be shown on the controller. 44 GB Additional Information Additional Information To Customers: For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using the SU-WL500 Wall-Mount Bracket (sold separately). • Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation. • Refer to “Detaching the Table-Top Stand from the TV” (page 7). • Refer to “TV installation dimensions table” (page 46). • Refer to “Screw and Hook locations diagram/table” (page 47). ~ • Place the TV on the Table-Top Stand, when securing the Mounting Hook. Mounting Hook Square hole Screw (+PSW 6 . 16) Sufficient expertise is required for installing this product, especially to determine the strength of the wall for w...
Otros modelos de este manual:TV - KDL-32E5500 (6.31 mb)
TV - KDL-32E5510 (6.31 mb)
TV - KDL-32E5520 (6.31 mb)
TV - KDL-40E5510 (6.31 mb)