Votos - 4, Puntuación media: 3.8 ( )

Fabricar: Sony Tamaño del archivo: 2.2 mb Nombre del archivo: Idioma del manual:

Refer to “To use i-Manual” for operation (page 9). • Before operating the TV, please read “Safety Information” (page 17). Retain this manual for future reference. Checking the accessories AC power cord (mains lead) (1) (for KDL-55EX503 and KDL-46HX703/ EX503/EX403) Cable holder (1) (for HX703 and NX503 models) Remote (1) Size AAA batteries (R3 type) (2) Table-Top Stand (1)* Fixing screws for stand (M5 . 16) (4) Assembling screws for stand (M5 . 16) (4) (only for KDL-40HX703/NX503/EX503, KDL-37EX503 and KDL-32NX503/EX503) Assembling screws for stand (M4 . 10) (3) (only for KDL-40/37/32EX403) * Disassembled except for KDL-55EX503 and KDL-46HX703/EX503/EX403. Refer to the supplied Table-Top Stand leaflet to assemble the stand. Inserting batteries into the remote Slide the cover to open. 3 GB Attaching the Table-Top Stand Attaching the Table-Top Stand 2 Place the TV set on the Table-Top Stand. 3 Fix the TV to the Table-Top Stand according to the arrow marks that guide the screw holes using the supplied screws. ~ • If using an electric screwdriver, set the tightening torque at approximately 15 kgf·cm {1.5 N·m}. Adjusting the viewing angle of the TV (HX703 and NX503 models only) This TV can be adjusted within the angles shown below. 0. 6. 4 1 Remove screw as Install screw into shown. the top screw hole of the Table-Top Stand. 2 3 Slide in. Lift up and tilt. ~ • To return to 0°, reverse the above procedure. 4 GB Connecting an antenna Preventing the TV from (aerial)/Set Top Box/ toppling over recorder (e.g. DVD recorder) Setting Connecting an antenna Preventing the TV from (aerial)/Set Top Box/ toppling over recorder (e.g. DVD recorder) Setting Set Top Box/recorder (e.g. DVD recorder) Connecting a Set Top Box/recorder (e.g. DVD recorder) with HDMI Set Top Box/recorder (e.g. DVD recorder) 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M4 . 16, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord (not supplied). 5 GB 6 GB Bundling the cables ~ • A cable holder is available for HX703 and NX503 models. To bundle the cables, follow steps 2 to 4. ~ • Do not bundle the AC power cord (mains lead) together with other cables. Performing the initial set-up 1 Connect the TV to your AC power outlet (mains socket). 2 For HX703 models, check the ENERGY SAVING SWITCH setting is on (z). 3 Press 1 on the TV. When you switch on the TV for the first time, the Language menu appears on the screen. Follow the instructions on the screen. Digital Auto Tuning: When you select “Cable”, we recommend that you select “Quick Scan” for quick tuning. Set “Frequency” and “Network ID” according to the information supplied from your cable provider. If no channel is found using “Quick Scan”, try “Full Scan” (though it may take some time). For a list of compatible cable providers, refer to the support web site: DVBC/ * For KDL-55EX503 and KDL-46HX703/EX503/EX403 * 4 For HX703 models only Programme Sorting: Changes the order of analogue channels stored in the TV. Programme Sorting: Changes the order of analogue channels ...

Descargar ahora

Introduzca dos números de la imagen: