Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
• Only a large-scale map that cannot be zoomed in or out is displayed if the TV is not connected to the Internet or the Internet online map service is terminated. 55/139 B • A map can be displayed in the case of photograph’s Exif data includes a date information, and the associated longitude and latitude information (“Log files”) has been recorded using a Sony GPS unit. Follow the procedure described below. 1 Connect the GPS unit to the USB port. 2 Press HOME. 3 Press to select “Photo”. 4 Press to select the GPS unit, then press . 5 Select the following items using , then set them using . -Time Zone - DST 6 Select “OK”, then press . The GPS log files are loaded. 7 Disconnect the GPS unit and connect the device on which the photograph is stored. 8 Select a photograph (50). 9 Press the green/red buttons to zoom in/out on the map. 56/139 Using BRAVIA Sync with Control for HDMI The Control for HDMI function enables the TV to communicate with the connected equipment that is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by connecting Sony equipment that is compatible with Control for HDMI (with HDMI cables), you can control them together. Be sure to connect the equipment correctly, and make the necessary settings. Control for HDMI • Automatically turns the connected equipment off when you switch the TV to standby mode using the remote. • Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play. • If you turn on a connected audio system while the TV is on, the sound output switches from the TV speaker to the audio system. • Adjusts the volume ( +/-)and mutes the sound ( ) of a connected audio system. • You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote by pressing: - to operate the connected equipment directly. - SYNC MENU to display the menu of the connected HDMI equipment on the screen. 57/139 Using BRAVIA Sync with Control for HDMI After displaying the menu, you can operate the menu screen by using , , colour buttons, and RETURN/BACK. - OPTIONS to display “Device Control”, then select options from “Options” and “Content List” to operate the equipment. - Refer to the instruction manual of the equipment for available control. • If “Control for HDMI” of the TV is set to “On”, “Control for HDMI” of the connected equipment is also automatically switched to “On”. To connect the equipment that is compatible with Control for HDMI Connect the compatible equipment and the TV with an HDMI cable. When connecting an audio system, be sure to also connect the DIGITAL AUDIO OUT (OPTICAL) jack of the TV and the audio system using an optical audio cable (40). To make the Control for HDMI settings The Control for HDMI settings must be set on both the TV side and connected equipment side. See “HDMI Set-up” (112) for the TV side settings. For settings on the connected equipment, refer to the operating ...
Otros modelos de este manual:TV - KDL-40Z5800 (14.38 mb)
TV - KDL-40Z5810 (14.38 mb)
TV - KDL-52Z5800 (14.38 mb)