Votos - 1, Puntuación media: 5 ( )

Fabricar: Sony Tamaño del archivo: 744.17 kb Nombre del archivo: 3858249111.pdf Idioma del manual:

GB This function is set to ON at the factory. To maintain better picture quality, it is advisable to leave the function on so that the OPC lamp remains lit. The OPC function works on all types of tapes, even on rental tapes. To change the setting, use the menu display. 1 Press MENU to display the main menu. 2 Move the cursor (z) to VISUAL MODE with + .or – Aand press OK. The VISUAL MODE menu appears. VISUAL MODE PICTURE CONTROL STANDARD MILD MOVIE OPC: ON Sel ec t and press OK 3 Move the cursor (z) to OPC with + .or – Aand press OK. 4 Select ON or OFF with + .or – Aand press OK. VISUAL MODE PICTURE CONTROL STANDARD MILD MOVIE OPC : OFF Se l ec t and press OK 5 Press MENU to erase the main menu. About the Auto Head Cleaner The auto head cleaner built into this set automatically cleans the video heads when a cassette is loaded or unloaded. If the effect of head cleaning is not sufficient even after a cassette has been loaded/unloaded several times, clean the heads using the Sony V-25CL video head cleaning cassette. For details on head cleaning see page 33. Additional Operations 29 Connecting Optional Equipment Watching the Picture Input from Optional Equipment to video/audio outputs Rear to 21-pin EURO-AV connectorInside the front panel WWWWW EEEEE2/.....2 VMC-212CE EURO cable (not supplied) To watch the video input signal Press E repeatedly until the desired input indicator appears on the screen. · E1 for audio/video input or RGB input through the Wconnector · E2 for audio/video input through the E2/.2 jacks on the front Editing with Another VCR Using an additional VCR, you can edit a tape. Editing from another VCR Connections are the same as in “Watching the picture input from optional equipment.” Editing onto another VCR Rear to 21-pin EURO-AV connector WWWWW VMC-212CE EURO cable (not supplied) Additional Operations Additional Information Troubleshooting Function Problems Possible causes and remedies TV reception No picture (screen is · The mains lead is disconnected. dark), no sound /Connect the mains lead. · The video TV is switched off. /Press ;, PROGR +/– or programme number on the Remote Commander, or PROGR +/– on the video TV. Good picture but no · The headphones are connected to 2jack. GB sound /Disconnect the headphones. · The Uis displayed on the screen. /Press U. · Press c+/–. No colour or poor · Adjust “CONTRAST,” “COLOUR,” and “BRIGHTNESS” in the colour (screen is PICTURE CONTROL menu. (page 15) dark) for colour programmes, but good sound....

Descargar ahora

Introduzca dos números de la imagen: