Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
• After setting a program; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21. 3)Press the F.FWD/B button (or press the REW/s button to go back one step) until the part you want to correct begins flashing, then make the changes pressing the PLAY/K or STOP/L button. 4)Press the POWER button to set automatic timer recording. BEGIN END -:- --:- -- -:- --:- -- -:- -- -:- -- -:- 7:12PM -:- -- -:- --:- -- -:- --:- -- -:- --:- -- 6 Set beginning minute Press the PLAY/K or STOP/L but- ton until the desired minute appears. (Example: “30” for 7:30PM) Then, press the F.FWD/B button. – TIMER PROGRAMMING – CH DATE BEGIN END - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- - B 61 7/06 FRI 7:30PM - - -/- - - -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - 7 Set end hour Press the PLAY/K or STOP/L but- ton until the desired hour appears. (Example: “8, PM” for 8:50PM) Then, press the F.FWD/B button. – TIMER PROGRAMMING – CH DATE BEGIN END - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - B 61 7/06 FRI 7:30P8:30PM - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - CH DATE Press the PLAY/K or STOP/L but - --/- -- - - --/- -- - ton until the desired minute appears. - --/- -- - 61 7/06 FRI - --/- -- - (Example: “50” for 8:50PM) B - --/- -- - - --/- -- - - --/- -- - Then, press the F.FWD/B button. BEGIN END -:- --:- -- -:- --:- -- -:- -:- -- 7: 30PM 8:50PM- -:- -:- -- -:- --:- -- -:- --:- -- -:- --:- -- 9 Set the tape speed Press the PLAY/K or STOP/L but- ton until the desired tape speed appears. (Example: SP) – TIMER PROGRAMMING – CH DATE BEGIN END - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - B 61 7/06 FRI 7:30PM 8:50MPSP - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - - -/- - - -:- -:- - - 22-EN 9I03 TO CANCEL AN AUTOMATIC TIMER RECORDING • After setting a program; 1)Press the POWER button. 2)Repeat steps [1] ~ [2] under TIMER RECORDING, page 21, and select a program you want to cancel. 3)Press the T-PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. • While recording is in progress; 1)Press POWER button. 2)Press the STOP/EJECT button on the TV/VCR. TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the REC indicator goes off. 2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed to. 4)Press the F.FWD/B button. The details of programs appear on the TV screen. 5)Press the MENU button on the remote control to return to TV mode. HINTS FOR AUTOMATIC TIMER RECORDING • Make sure the channel you want to record is properly set in advance. • It is not necessary to press the RECORD button for timer recording. • Recording begins automatically at the Start time. • If you are recording using a Timer mode, you may not operate the unit manually. • The erase-prevention tab on the cassette must be in place (or you must put tape over the hole). • If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off. • If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediately, and the tape will be ejected. AUTO RETURN With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically. – M E N U – 1 Select “USER’S SET UP” TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP B USER’S SET UP Press the MENU button on the V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] remote control. Press the PLAY/K or STOP/L but-ZERO RETURN TIME SEARCH INDEX SEARCH ton to point to “USER’S SET UP”. Then, press the F.FWD/B button. 2 Set “AUTO RETURN” to [ON] Press the PLAY/K or STOP/L but ton to point to “AUTO RETURN”. Press the F.FWD/B or REW/s button until [ON] appears. Then, – USER’S SET UP – RENTAL [OFF] REPEAT PLAY B AUTO RETURN [ON] press the MENU button on the remote control to return to TV mode. 3 Auto Return will begin When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s). NOTE: • If you press the POWER button while tape is rewinding, the Auto Return will stop. 4 Watch the recorded program Press the PLAY button. TO CANCEL THE AUTO RETURN MODE Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. Then, press the MENU button on the remote control to return to TV mode. If there is a power failure of any kind, the unit will retain its memory for this feature. WAKE UP TIMER The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time. NOTES: • Use the remote control for this procedure. • Clock must be set to the correct time before setting the timer. • If you want to select [TAPE], you must insert a cassette tape in the TV/VCR. The tape will start playback automatically on your desired time. 1 Select “WAKE UP TIMER” Press the WAKE-UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed. [TV] [ON] W...
Otros modelos de este manual:TV - SRC21134 (377.46 kb)