Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
TV - 42LP360H (3.77 mb)
TV - 42LP360H (3.82 mb)
TV - 42LP360H (4.12 mb)
TV - 42LP360H (7.22 mb)
Resumen del manual
See p.45. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.45. Ack [j][ ][Set ID][ ][OK/NG][Data][x] Ack [r][ ][Set ID][ ][OK/NG][Data][x] 10. Sharpness (Command: k k) 14. Bass (Command: k s) (Except for LP86**) >>To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. >>To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 (Except for LP86**) Data Min : 00 to Max : 32 (Only LP86**) * Refer to ‘Real data mapping’. See p.45. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.45. Ack [k][ ][Set ID][ ][OK/NG][Data][x] Ack [s][ ][Set ID][ ][OK/NG][Data][x] 11. OSD Select (Command: k l) >>To select OSD (On Screen Display) on/off when controlling remotely. 15. Balance (Command: k t) Transmission [k][l][ ][Set ID][ ][Data][Cr] >>To adjust balance. You can also adjust balance in the AUDIO menu. Data 00 : OSD off 01 : OSD on Ack [l][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.45. Ack [t][ ][Set ID][ ][OK/NG][Data][x] 12. Remote control lock mode (Command: k m) >>To lock the front panel controls on the monitor and remote control. Transmission [k][m][ ][Set ID][ ][Data][Cr] 16. Colour Temperature (Command: x u) Data 00 : Lock off 01 : Lock on >>To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu. Ack [m][ ][Set ID][ ][OK/NG][Data][x] Transmission [x][u][ ][Set ID][ ][Data][Cr] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * In the standby mode, if key lock is on, TV will not turn on by power on key of IR & Local Key. Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. See p.45. Ack [u][ ][Set ID][ ][OK/NG][Data][x] 19. Tune Command (Command: m a) 17. Energy Saving (Command: j q) >>Select channel to following physical number. >>To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Transmission [j][q][ ][Set ID][ ][Data][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No. 0 -> Don’t care Data02 : [Antena] 0x00 : Analog Main 0x10 : DTV Main 0x20 : Radio [Cable] 0x80 : Analog Main 0x90 : DTV Main 0xA0 : Radio Channel data range Analogue - Min: 00 to Max: 63 (0 to 99) Digital - Min: 00 to Max: 3E7 (0 to 999) Power Saving Function Level Description 7 6 5 4 3 2 1 0 0 0 0 0 Low Power 0 0 0 0 Off 0 0 0 0 Low Power 0 0 0 1 Minimum 0 0 0 0 Low Power 0 0 1 0 Medium 0 0 0 0 Low Power 0 0 1 1 Maximum 0 0 0 0 Low Power 0 1 0 1 Screen Off 0 0 0 0 Low Power 0 1 0 0 Auto Ack [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 to Max: 7DH >>'Auto' is available in TV that supports 'Intelligent Sensor' Ack [q][ ][Set ID][ ][OK/NG][Data][x] 20. Programme Add/Skip(Command: m b) 18. Auto Configure(Command: j u) >>To set skip status for the current Programme. Transmission [m][b][ ][Set ID][ ][Data][Cr] >>To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Data 00 : Skip 01 : Add Transmission [j][u][ ][Set ID][ ][Data][Cr] Ack [b][ ][Set ID][ ][OK/NG][Data][x] Data 01: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] 21. Key(Command: m c) >>To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code - See p.38. Ack [c][ ][Set ID][ ][OK/NG][Data][x] 22. Control Back Light(Command: m g) >>To control the back light. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] 23. Input select (Command: x b) (Main Picture Input) 24. 3D(Command: x t) (only 3D models) (Depending on model) > To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data 01][ ][Data 02] Data Structure Data 01 00 : 3D On 01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D Data 02 00 : Top and Bottom 01 : Side by Side 02 : Checker Board 03 : Frame Sequential Data 03 00 : Right to Left 01 : Left to Right Data 04 3D Effect(3D Depth): Min : 00 - Max : 14 (*transmit by Hexadecimal code) * If data1 is 00(3D On), data4 has no meaning. * If data1 is 01(3D off) or 02(3D to 2D), data2, data3 and data4 have no meaning. * If data1 is 03(2D to 3D), data2 and data3 have no meaning. X : don’t care 25. Extended 3D(Command: x v) (only 3D models) (Depending on model) > To change 3D option for TV. Data 01 : 3D option 00 : 3D Picture Correction 01 : 3D Depth (2D to 3D only) 02 : 3D Viewpoint 03 : 3D Picture Size (Plasma TV only) 04 : 3D Picture Blance (Plasma TV only) 05 : 3D Optimization (Active type (LCD TV) only) Data 02 It has own range for each 3D option determined by Data 01. 1) When Data 01 is 00 00 : Right to Left 01 : Left to Right 2) When Data 01 is 01, 02 Data Min: 0 - Max: 14 (*transmit by Hexadecimal code) Data value range(0 - 20)...
Otros modelos de este manual:TV - 37LP360H (6.04 mb)
TV - 39LP632H (6.04 mb)
Monitores - 42LN549E (6.04 mb)