Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
3. Press the vor V buttons to select the item on the screen you wish to adjust then press Bto confirm. For a description of the menu items and their effects, see the table below. 4. Press the v, V, Bor b buttons to adjust your selected item. 5. As soon as you have adjusted the item, press the OK button to store the new setting. 6. Repeat steps 3-5 if you wish to adjust any of the other items. 7. Press the MENU button to remove the menu from the TV screen. Picture Control Picture Adjustment Select: Enter: Picture Mode Contrast Brightness Colour Sharpness Reset AI Personal Noise Reduction Digital Mode On Colour Tone On DRC 100 Normal Item Effect/Operation Picture Mode V Live (for live broadcasts) Personal (for individual settings) Movie (for movie broadcasts) v Game (for computer games) Live Personal Picture Mode Movie Game Contrast Less bB More Brightness* Darker bB Brighter Colour* Less bB More Hue** Reddish bB Greenish Sharpness* Softer bB Sharper Contrast *Only available if ’Personal’ is selected in ‘Picture Mode’ **Only available for NTSC colour signal (eg. US video tapes) Reset Resets picture to the factory preset levels On AI Off AI V Off: Normal. (Artificial Intelligence) v On: Automatic optimization of contrast level according to the TV signal. Noise Reduction V High: High noise reduction. Mid: Medium noise reduction. Low: Low noise reduction. Auto: Optimum noise reduction automatically selected. Noise Reduction High Mid Low Auto Off v Off: No noise reduction. Digital Mode Normal DRC 50 DRC 100 Digital Mode V v Normal: Basic 100Hz picture quality. DRC 50: Improved picture resolution for viewing scrolling characters. DRC 100: Optimum picture resolution creating flicker-free pictures. Colour Tone V v Warm: Normal: Cool: Gives a warm tint to the picture. Normal. Gives a cool tint to the picture. Colour Tone Normal Cool Warm 13 Using the TV menu system: Sound Control Item Effect/Operation Equaliser Mode V Personal Vocal Jazz Rock Pop v Flat (fixed setting, cannot be adjusted) Equaliser adjustment You can adjust the mode selected in Equaliser mode by cutting and boosting the 5 selected frequency bands. Press b or B to select the frequency band then V or v to adjust the frequency. Finally, press the OK button to store the new adjustment. If you want to store the new setting, you need to set the Equaliser mode to ‘Personal’. Personal mode permanently stores the setting, all other modes (Vocal, Jazz, Rock, Pop) store only until the next mode change. Balance b More left B More right Loudness V Off: Normal v On: For music broadcasts Space V Off: Normal v On: Spatial acoustic effect Auto Vol. Control V Off: Volume level changes according to the broadcast signal. v On: Volume level of the channels will stay the same independent of the broadcast signal (eg in the case of advertisements). Dual Sound For a bilingual broadcast: V A for channel 1 v B for channel 2 For a stereo broadcast: V Mono v Stereo When NICAM stereo is being broadcast, the indication NICAM appears briefly on the screen. Headphones i Volume Adjusts headphone volume. Can also adjust the volume level of additional equipment connected to the RCA sockets on the rear of the TV. i Dual Sound Only available when PAP feature is selected: V Stereo: The sound of one screen comes through both the TV loudspeakers and the headphones. v PAP: The sound of the left screen comes through the TV loudspeakers, the sound of the right screen is selectable via headphones. For more detail on PAP, refer to the ‘Operating PAP’ section of this manual. Audio Adjustment Equaliser Mode Equaliser Adjustment Balance Loudness Space Auto Vol. Control Dual Sound Volume Dual Sound Stereo Off Off Stereo Select Mode : Off Confirm: OK Personal Vocal Jazz Rock 0 NICAM NICAM Equaliser Adjustment Sel: Adjust: Confirm:OK (Personal) + 0 – 120 500 1,5K 5 K 10 K Auto Vol. Control Off On Balance 0 Loudness Off On Space Off On Dual Sound Mono Stereo NICAM Volume Dual Sound PAP Stereo NICAM Using the TV menu system: Using the Features menu 1. Press the MENU button on the remote control to display the menu on the TV screen. 2. Press the v or V buttons to select for the ‘Features’ menu then press B to enter the ‘Features’ menu. 3. Press the v or V buttons to select the desired menu item then press B to confirm. For a description of the menu items and their effects, see the table below. 4. Press the v, V, B or b buttons to select the desired setting. 5. Press the OK button to confirm your choice of setting. 6. Repeat steps 3-5 if you wish to select any of the other items. 7. Press the MENU button to remove the menu from the TV screen. Sleep Timer You can select a time after which the TV switches itself into standby mode. V Off v 90 min Parental Lock V Off: No parental lock. v On: This feature disables the TV buttons when the set is in standby mode. It is only possible to switch the set back on by pressing a button on the remote control. AV2 Output V TV audio/video signal from the aerial AV1 audio/...
Otros modelos de este manual:TV - KV-34FQ75D (11.63 mb)