Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
(22.7 kg). Caution The DX-TVM102 is designed for use in wood frame walls only! The weight of your TV must not exceed 50 lbs. (22.7 kg). The wall must be capable of supporting five times the weight of the TV and wall mount combined. Do not use this product for any purpose not explicitly specified by Dynex. Improper installation may cause property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the installation, contact Customer Service or call a qualified contractor. Dynex is not responsible for damage or injury caused by incorrect installation or use. Warning This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children. Supplied parts and hardware Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the item to your dealer, but contact Customer Service. Never use damaged parts. PARTS LIST Note: Not all parts will be used Missing parts? Call 800-573-2860 A Wall bracket (1) B Left TV bracket (1) C Right TV bracket (1) DM4 x 0.47" (12 mm) screws (4 E M5 x 0.47" (12 mm) screws (4 F M6 x 0.47" (12 mm) screws (4 G M6 x 0.79" (20 mm) screws (4 H M4 x 1.18" (30 mm) screws (4 I M5 x 1.18" (30 mm) screws (4 J M6 x 1.38" (35 mm) screws (4 K M4/M5 washer (8) L M6 washer (4) M M4/M5 spacer (4) N M6 spacer (4) O 5/16" (7.9 mm) washer (2) ® P Tilt bracket (2) Q 5/16" x 2.5" (63.5 mm) lag bolt (2) R Carriage bolt (4) S Nylock nut (4) © © © © Tools you will need: Power drill 3/16" wood drill bit Phillips screwdriver Level Socket wrench with 1/2 in. socket Pencil Stud finder Adjustable wrench Awl Ccr. 3/16 in. JF1/2 in M4 x 12mm M5x 12m M6 x 12mm M6x 20m M4 x 30mm M5 x 30m 5/16 x 2.5 in 1 Attach the wall bracket to the wall studs. Caution: Avoid potential injuries or property damage! Any material covering the wall must not exceed 16 mm (5/8 in.). Caution: Avoid potential injury or property damage! Do not overtighten the lag bolts [Q]. Tighten the lag bolts [Q] only until the washers [O] are pulled firmly against the wall bracket [A]. 3/16 in. 5 mm 5 Mount the TV to the wall bracket First mount the top hooks of the TV brackets onto the wall bracket, then press the bottom of the TV brackets against the wall bracket until they snap into place. HEAVY! You will need assistance with this step. Maintenance To remove the TV from the wall bracket, pull down on the release straps, pull the bottom of the TV away from the wall bracket, then lift the TV completely off the wall bracket. D YN E X ••• DX-TVM102 Slim-Profile TV Mount USER GUIDE 6907-002001 <00> © 2009 Best Buy Enterprise Services, Inc. All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners. ENGLISH 09-0602...