Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
2 Remove the four screws holding the TV to its stand column, then remove the stand column. 3 Secure the wall-mount bracket (not included) to the back of your TV using the screws provided with the bracket. Setting up your remote control 1 While pressing the release button on the battery compartment cover on the back of the remote, lift the cover off the remote. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries align with the + and – symbols in the battery compartment. 3 Replace the cover. To program your existing remote control to work with your Dynex TV, see the table below for common codes. If you have problems programming your remote, or need a different remote control code, visit for the latest remote control code information. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver or game station Using HDMI (best) Using component (better) Using composite (good) Using S-video (fair) Connecting an antenna Connect a 75 ohm cable (not included) to ANT/CABLE IN jack on the back of your TV and the RF OUT jack on the antenna. Connecting a home theater system Using analog audio cable: Note: Cable connectors and jacks are often color-coded. Match the colors when you connect the AV cable. Using digital audio cable: Note: The DIGITAL OUTPUT jack only works with digital TV channels. + - Philips PHDVD5, PH5DSS, PMDVR8, PDVR8 115 DirectTV RC23 10463 RCA RCU807 135 One for All URC-6690 0464 Sony RM-VL600 8043 Comcast M1057 0463 Dish Network VIP508, VIP622 720 Motorola DRC800 0463 TIVO Series 3, HD 0091 Universal remote control makers and models Set-top box makers and models Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007) Screw holes 24" LCD TV I QUICK SETUP GUIDE I DX-24L150A11 ENTER ENTER Press to move the cursor on the screen or to adjust a selected item. Press to open the on-screen menu. Press to return to the previous menu. Press to select menu options. Press to confirm a selection or to enter a sub-menu. Press to close the menu. MENU MENU EXIT ENTER Setup Wizard Move Select MENU Previous Next English Francais Espanol Choose your menu language ENTER Next Move Select MENU Exit Auto Scan Favorites Show/Hide Channel No. Channel Label DTV Signal: Audio TV Source Picture Setup Antenna Channel 2.1 Normal WGBH-SD Picture Move Select MENU Exit Picture Mode Contrast Brightness Color Tint Advanced Video Audio Setup Channel Custom 70 40 60 0 Sharpness 50 Backlight 30 Connecting power Connect the power cable to the AC IN jack on the back of the TV, then connect the other end to a power outlet. Turning on your TV for the first time 1 Plug in your TV and turn it on. The initial Setup Wizard opens. 2 Press . or . to select the menu language you want, then press ENTER. The Time screen opens. 3 Press . or . to highlight an option and press . or . to change the setting. Options include: • Time Zone-Select your time zone • DST-If your area uses daylight savings time • Mode-Select Manual to set date/time manually or Auto to have them set automatically. • If you select Manual, press . or . to highlight an option, then press . or . to change the setting. 4 When you are done, press ENTER to move to the next screen. The Choose your Picture Mode screen opens. 5 Press . or . to highlight Home Mode (recommended) or Retail Mode. If you selected Home Mode, the Choose your TV source screen opens. 6 Press . or . to highlight Antenna, Cable, or Cable/Satellite Box, then press .. If you selected Antenna or Cable, your TV automatically scans for available channels. If you selected Cable/Satellite Box, you are asked to select the correct input source for your set top box. The channel scanning can take up to 30 minutes. 7 Press EXIT to close the menu, then select the input source through the INPUT SOURCE menu. Selecting the video input source 1 Press INPUT, press . or . to highlight a source, then press ENTER. You can also press any of the video source buttons directly. Adjusting the volume • Press VOL+ or VOL- to change the volume. • Press MUTE to turn off the sound. Selecting a channel • To move to a different channel in the channel list, press CH^ or CH ^. OR • Enter the channel number directly using the number buttons. Viewing channel information • Press INFO to view an information banner. The information banner shows the current program information such as channel number, video input source, and resolution. • Digital mode information—Displays the channel number, station name, channel label, broadcast program name, TV rating, signal type, audio information, resolution, CC mode, current time, and current program start and end times. • Analog mode information—Displays channel number, channel label (if preset), signal type, audio information, and resolution. • Press GUIDE to show the digital program guide, which may view a list of available programs, program times, and program summaries, depending on the information p...