Votos - 3, Puntuación media: 5
(
)
)
|
Resumen del manual
24. SAFETY CHECK Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. -2 V-CHIP ZOOM CCD 1 2 3 4 5 6 7 8 9 1-- 0 RECALL CH+ CHVOL- MENU VOL+ P.MODE TV/AV SLEEP DISPLAY ES-10702C Brief Operating Instructions 1. Connection Connect the antenna lead or CATV cable or external equipments ( such as Antenna, Cable TV, VCD, DVD, VTR, Set top box, etc .) to the corresponding terminals or interface on the TV rear ( please refer to the owner's manual of the equipment to be connected as well ) and confirm that the signal source is available and works normally. 2. The remote control Open the battery cover of the remote control and install two AAA size batteries and then close the battery cover . -3- Power on / off CHANNEL NUMBER : Direct Channel selection Recall: Return to previous channel Display: Display the current channel number TV/AV: TV/AV selection CH+/CH-: Channel selection Cursor up/down VOL+/VOL-:Control the volume level Select or adjust from a particular menu P.MODE: Select the picture mode Mute the sound SLEEP: Display the sleep timer and MENU: Call up the main menu start the function V-CHIP: Enter the parental control menu CCD: C.CAPTION on/off ZOOM: Zoom in / out IN S-VIDEO VIDEO AUDIO MONO Y Cb Cr Antenna Component Video Input Audio Input Video Input S-VIDEO Input IN S-VIDEO VIDEO AUDIO MONO Y Cb Cr ANT75 3. Switching on/off 1 ) Connect the TV to power outlet, the power indicator will display red. Press the power switch or the button on the remote control to turn on the TV. 2 ) Press the power switch or the button on the remote control to turn off the TV. 4. Signal source selection Press the TV/AV button to select TV or AV mode. 5. Air/Cable selection You can select the signal receiving method according to the following steps: PRESET 1 ) Press the MENU button repeatedly until the PRESET menu appears as shown on the right. 2 ) Press the CH+ or CH-button to select the item ANTENNA. 3 ) Press the VOL-or VOL+ button to change the item between AIR and CATV. 6. Channel search 1 ) Press the MENU button repeatedly until the PRESET menu appears as shown on the right. 2 ) Press the CH+ or CH-button to select the item AUTO-SEARCH. 3 ) Press the VOL-or VOL+ to start to auto-search programs. 7. Picture adjustment1 ) Press the MENU button, and the PICTURE menu appears as shown on the right. 2 ) Press the CH+ or CH- to select the item you want to adjust. 3 ) Press the VOL-or VOL+ to adjust the item. 8. Sound adjustment 1 ) Press the VOL+ or VOL-button to adjust the volume. 9. Timer setting 1 ) Press the MENU button repeatedly until the CLOCK menu appears as shown on the right. 2 ) Press the CH+ or CH- to select the item you want to set. 3 ) Press VOL- to set hour and press VOL+ to set minute. POSITION 17 SKIP OFF ANTENNA AIR AUTO-SEARCH AdjustSelect PRESET POSITION 17 SKIP OFF ANTENNA AIR AUTO-SEARCH Adjust Select PICTURE BRIGHT 75 CONTRAST 80 COLOR 50 SHARP 50 TINT 00 CORING OFF BLACK STRETCH ON Select Adjust CLOCK TIME : ON-TIME : OFF-TIME : ALARM : BESPOKE-TIME : POSITION Select Adjust Note1: All keys mentioned above are on the remote control unless indicated otherwise. Note2: For more detailed information, please refer to the owner's manual. -4 -5- Learning about your new TV You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the back panel provide all the connections you will need to connect other equipment to your TV. Caution: The TV power plug has one prong wider than the other and will fit only one way into a standard electrical outlet ( 120VAC,60Hz ). If the plug does not fit into the outlet, try turning it around. If the plug still does not fit, the outlet is probably non-standard and must be replaced by a qualified electrician. Do not tamper with the plug or try to force it into a non-standard outlet. Selecting a location for the TV 1 ) Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2 ) Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV. Note: The above figures are for reference only, please refer to the actual units to determine their appearance. If you haven't connected electronic equipment before, or you have been frustrated in the past, you may wish to read this section. (Cables are not supplied) Caution: Do not plug the TV in until you have finished connecting all of your equipment. Connecting your TV Front Controls Power Indicator Infrared Sensor Power Switch Front Panel Volume Down TV/AV Selection Channel Up Channel Down Volume Up MENU Back Connections AC Cord and Plug IN S-VIDEO VIDEO AUDIO MONO Y Cb Cr Antenna Component Video Input Audio Input Video Input S-VIDEO Input IN S-VIDEO VIDEO AUDIO MONO Y Cb Cr ANT75 AV/TV MENU VOL CH AV/TV MENU VOL CH VIDEO AUDIO/L AUDIO/R Lateral AV Video I...
Otros modelos de este manual:TV - C2005US (975.8 kb)
TV - C2005US (975.8 kb)