Votos - , Puntuación media:
(
)
)
Fabricar: Omnimount
Tamaño del archivo: 23.05 kb
Nombre del archivo: 1501186_PM_EN.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
Connect the antenna cable/wires from inside the wall to the rear connectors on the plate, then retighten the screws. Warning: Be sure the exposed portions of the cables/wires do not touch each other. 6. Use the two supplied short screws to secure the plate to the center holes of the brackets. 7. Use a flat-bladed screwdriver to loosen the screws at the back of the supplied three-prong cable plug. Connect the 300-ohm antenna wire from the audio and video outputs of the TV (or the left and right channels of the FM radio) to the plug, then retighten the screws. 8. Insert the plug into the wall plate’s jack. Printed in Taiwan 12A98...
Otros modelos de este manual:TV - 15-1186 (23.05 kb)
TV - 15-1186 (23.05 kb)