Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Keep these items away from young children ! I .Make sure these instructions are read and completely understood before attempting installation. If you a re unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced. 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. Mi' PyLE Honie INSTALLATION GUIDE Item No.:PSWLE55 • TV Size Range: 36" '~55" • Maximum Weight Capacity: 35kg/77lbs • Locked by safety bolt on the bottom • Balance adjust system is included pyleaudio. com -^CAUTION - This product was designed to be installed on wood stud walls and solid concrete walls. Before in st ailing make sure the sup porting surface will support the combined load of the equipment and hardware. Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. Hardware Kit: ID Qty Description 1 1 Wall plate 2 1 Left bracket 3 1 Right bracket 4 2 Safety bolt 5 1 Bubble level A 4 M4x 1 2mm bolt B 4 M4x 1 6mm bolt C 4 M5 x 1 6mm bolt D 4 M6 x 1 6mm bolt E 4 M8 x 1 6mm bolt ID Qty Description F 4 M5x36mm bolt G 4 M6x36mm bolt H 4 M8x36mm bolt 1 4 Square washer J 6 Long bolt K 6 Wall anchor L 6 Long bolt washer M 4 Spacer Part 3-Mounting the flat panel screen Hook the top of brackets(2,3) onto the top flange of wall plate(l). Then swing the screen down. Tighten the safety screw(4) on each bracket to lock the screen into place. NOTE: Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment. Part 2b-Attaching brackets to screen with recessed back Center brackets vertically on back of screen. Select the medium(F or G) or large(H) screws. Attach brackets to screen using four selected screws,four square washers(l) and four spacers(M) at the top and bottom of each bracket. Tighten screws firmly. Do not overtighten. -6- Part I a-Wood Stud Mounting Use wall plate as a template, make sure it is level, and mark mounting hole along the center lines of the wood studs. Drill 3/1 6"(5mm)dia. holes 2" (50mm) deep. Level wall plate and attach to wall with long bo11s(J) and washers(L). Tighten screws firmly. Do not overtighten. Wood stud Part I b-Concrete Wall Mounting Level wall plate anduseitasa template to mark holes. Drill 3/8"( I Omm) dia. holes 2"(50mm) deep. Insert anchors(K) into holes and secure wall plate with long bolts(J) and washers(L). Tighten screws firmly. Do not overtighten. -4- Part 2a-Attaching Brackets To Screen With Flat Back Center brackets vertically on back of screen. Select the small(A or B),medium (C or D) or large(E) screws. Attach brackets to screen using four selected screws and four square washers(l) at the top and bottomof each bracket. Tighten screws firmly. Do not overtighten. -5-...