Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
You see the following screen: Click here 4. Click IP connection. You see this screen: Enter the IP address and click Search note You can add up to 16 projectors to the list and connect to four projectors at the same time. If you add more, NS Connection begins 5. Enter the projector’s IP address and click Search. to delete projectors from the list, starting with the first projector added. The IP address appears in the Projector list and a searching icon displays: This icon indicates search is in progress This icon appears if the search fails to find the projector If the search fails to find a projector with the specified IP address, the searching icon turns into a question mark. If this happens, run EasyMP to check the projector’s IP address, then repeat this step. 6. Click the projector you want to connect to, then click the Connect button. If more than one projector is listed, you can select additional projectors and connect to them at the same time. 7. If you are prompted for a keyword, enter the four-digit number displayed on the EasyMP Network screen and click OK. The computer’s image is transmitted to the projector. See the Projector User’s Guide and page 9 for details about using the floating control bar. tip ip Use a static IP address when configuring a projector for the network if you plan to use it in a group. If you use DHCP, the projector’s IP address will change every time you turn it off and on again, and you will have to recreate the projector group. Using Projector Groups You can register projectors as a group if you want to provide quick and easy access to other computers. You can also export or import group information as a file to another computer. Projectors must be connected to the network in Access Point mode, and must be on the same network segment as the computer used to create the group, or the computers that import or export group information. Creating a Group You can register up to 16 projectors as a group, and all projectors must be part of your wireless network. 1. Start NS Connection. Then click the Extension button on the EMP NS Connection screen. You see this screen: Select these two boxes 2. Select Use IP connect mode and Use Group List. 3. Click the Advanced button. You see this screen: 4. Enter a name for the group in the Connection Group box. Then note You cannot use the addresses enter the IP address of the projector you want to register in the IP 0.0.0.0 or 255.255.255.255. address box: 5. Click Add. The IP address appears in the list of registered printers, and the searching icon appears beside it. If the projector is found, its name appears in the projector list. 6. Repeat steps 4 and 5 for each projector you want to add to the note To remove a projector from group. the group, select it from the 7. Click OK to save the projectors as a group. When you see a projector list and click confirmation message, click Yes. Delete. 8. Click Close to close the Advanced screen. 9. Click OK to close the Extension screen, then close NS Connection. Connecting to a Projector in a Group Follow these steps to connect to a projector in a group: 1. Start NS Connection. Then click the Extension button on the EMP NS Connection screen. You see this screen: Select these two boxes 2. Select Use IP connect mode and Use Group List. You see the following screen: 3. From the Connection Group list, choose the group you want to connect to and click OK. You see this screen: If this says IP connect mode, skip step 4. 4. Click IP connection. (If the upper left button on the screen says IP connect mode rather than Automatic search mode, skip this step.) You see this screen: Select the projector Then click Connect 5. Select the projector you want to connect to and click Connect. 6. If you want, repeat step 5 to connect to additional projectors. The computer’s image appears on the projector screen. Exporting a Projector Group You can export group information as a file to another computer on the wireless network. This is useful, for example, if you want to share group access with multiple users. 1. Start NS Connection. Then click the Extension button on the EMP NS Connection screen. You see this screen: Select these two boxes 2. Select Use IP connect mode and Use Group List. Then click the Advanced button. note You must export all of the groups in the Connection Group list. You can’t export individual groups. Even if a projector is registered in a group, you don’t have to use the group to connect to it. If your laptop is configured for your wireless network, you can connect to a projector as described on page 6. You see this screen. note If you haven’t created any groups, the Export button will be grayed out. You must create at least one group before the Export button is active. 3. Click Export to export a file for all groups in the Connection Group list. 4. Highlight the file name (NSGroup.ini), and then select Save to. Choose a location on the second computer and click Save. To connect to the projector fr...
Otros modelos de este manual:TV - PL 735c (2.05 mb)