Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
1 Press MENU T to display the “MENU 1” menu, then select “VNR”. MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00 SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU M to select “ON”. To cancel the VNR function, select “OFF”. COMPRESS (16:9) This function converts a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio). Use for pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), to restore their original dimensions. 1 Press MENU T to display the “MENU 1” menu, then select “COMPRESS (16:9)”. MENU 1 INPUT TV VNR ON COMPRESS(16:9) ON PICTURE TILT 00 SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU M to select “ON”. To cancel the COMPRESS (16:9) function, select “OFF”. Using the TV’s menus AUTO SHUTOFF You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO SHUTOFF”. MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU M to select “ON”. To cancel the AUTO SHUTOFF function, select “OFF”. • The AUTO SHUTOFF function does not turn off the TV’s main power. • The AUTO SHUTOFF will not work for a VIDEO mode. CHILD LOCK You can disable the front control buttons of the TV. When this function is set to “ON”, the TV can be operated using only the remote control. Use this function to prevent children from operating the TV without parental consent. 1 Press MENU T to display the “MENU 2” menu, then select “CHILD LOCK”. MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU M to select “ON”. To cancel the CHILD LOCK function, select “OFF”. • The CHILD LOCK function is canceled when you turn the power off. BLUE BACK You can mute the sound and change the picture into a blue screen while no signals are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “BLUE BACK”. MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU M to select “ON”. To cancel the BLUE BACK function, select “OFF”. • To view a broadcast even when the reception signal is poor, set the BLUE BACK function to “OFF”. • Even when the BLUE BACK function is set to “OFF”, the sound may not be audible. Using the TV’s menus VIDEO-2 SET Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed. 1 Press MENU T to display the “MENU 2” menu, then select “VIDEO-2 SET”. MENU 2 AUTO SHUTOFF ON CHILD LOCK ON BLUE BACK ON VIDEO-2 SET COMPONENT SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Set the VIDEO-2 SET according to the video signal input from the VIDEO-2 terminal. If a normal video signal (composite video signal) is input: Press the MENU m buttons to select “VIDEO”. If a component video signal (Y/CB/CR signals) is input: Press the MENU m buttons to select “COMPONENT”. Picture Adjustments You can adjust the picture as you like. 1 Press MENU T to display the “MENU 4” menu. MENU 4 TINT COLOUR BRIGHT CONT. SHARP SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU T to select an item and press MENU M to adjust it. TINT* - : Reddish + : Greenish COLOUR - : Lighter + : Deeper BRIGHT - : Darker + : Brighter CONT. - : Lower + : Higher SHARP - : Softer + : Sharper * TINT (tint) is displayed only when viewing images from NTSC3.58 or NTSC4.43 colour systems. Sound Adjustments You can adjust the sound as you like. 1 Press MENU T to display the “MENU 5” menu. MENU 5 BASS TREBLE BALANCE AI VOLUME ON SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU T to select an item and press MENU M to adjust it. TREBLE - : Weaker + : Stronger BASS - : Weaker + : Stronger BALANCE - : Left + : Right Using the TV’s menus AI VOLUME You can prevent the sudden increase or decrease of volume that occurs when changing channels or switching VIDEO modes. 1 Press MENU T to display the “MENU 5” menu, then select “AI VOLUME”. MENU 5 BASS TREBLE BALANCE AI VOLUME ON SELECT BY EXIT BY OPERATE BY -+ DISPLAY 2 Press MENU M to select “ON”. To cancel the AI VOLUME function, select “OFF”. • The AI VOLUME function may not operate as expected if the sound input level from a broadcast station (or video software) is extremely low. • The AI VOLUME function for TV mode and VIDEO mode can be set separately. For example, you can set it to be off in TV mode and on in VIDEO mode. If you set the AI VOLUME function while viewing a TV channel, the setting is registered as the setting for TV mode. If you set the AI VOLUME function while viewing images from a VIDEO terminal, the setting is registered as the setting for VIDEO mode. AUTO CH PRESET You can automatically preset all TV channels that can be received by your TV to channels. 1 Press...