Iniciar sesión:
Votos - 3, Puntuación media: 4.3 ( )

Manual de usuario JVC, modelo WD-52627

Fabricar: JVC
Tamaño del archivo: 5.43 mb
Nombre del archivo: d4770cf7-0b74-4202-aeb3-177574c8effe.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


• by pressing REC on the remote control. Your TV is able to start and stop recordings automatically and send the signals from one external playback device to another external recording device. It is also able to convert digital channels and IEEE 1394 device signals to analog signals that can be recorded on NetCommand- compatible analog VHS and S-VHS VCRs connected to the record audio and video outputs on the back of the TV. You can schedule the recording to take place at a later time and program the recording duration for a minimum of 30 minutes and a maximum of 6 hours (in 30-minute increments). The default is 1 hour. When a digital recording is being made, the TV will either direct the signals to the recording device using the IEEE 1394 cable. In the case of an analog recording (as to a VCR) the TV converts the digital signals to analog format and sends the analog output to the VCR through the RECORD OUTPUT jacks. During the recording, the TV can be powered Off. To prevent recording of unwanted material while recording to a VCR or A/V disc, press PAUSE to temporarily stop recording. Press PAUSE again to resume recording. You cannot record from an analog channel or device or a VHS or S-VHS VCR to a digital recording device such as a DVCR or A/V Disc. Recording Now Can be used when viewing Antenna 1 or 2, an IEEE 1394 device, or a non-recording traditional device. To initiate recording now: 1. Press REC (record) on the TV remote or press ENTER if the Record menu is displayed. 2. Review the Record To (destination) device (VCR) and duration. Change if necessary. 3. Press REC a second time to initiate recording. Time-Delayed Recording To initiate a time-delayed recording: 1. Press REC (record) on the TV remote or press ENTER if the Record menu is displayed. 2. Press ADJUST or to select the channel, device to record to, duration time, start time (press ENTER after selecting hour and minutes to set the time) and day. 3. Select Add and press ENTER to add the recording to the record list. If your selection is successful, a confirmation message will be displayed. If you pick overlapping times, day(s), or destination devices, you will see a message stating there is a conflict. 4. To exit, press HOME on the TV remote after all recordings have been added. IMPORTANT Recordings scheduled on this screen are independent of recordings scheduled through TV Guide On Screen®. Recordings scheduled with TV Guide On Screen have priority if there is a conflict between the two recording schedules. Record Menu, continued Record List Figure 16 To see a list of all currently programmed recordings, select the record list option on the Record menu or press GUIDE while viewing the Recording setup screen. A maximum of 32 recordings can be scheduled. To cancel a recording on the Record List, press ADJUST or to select the recording, then press CANCEL. To page through the list, press CH or . Figure 16. Record List screen Analog Recordings When you record a 16:9 digital channel to an analog VCR or recording device, there is a mismatch of the picture shape between the 16:9 ratio of the source and the narrower 4:3 ratio of the analog recorder. • For anamorphic playback on this widescreen TV, choose the anamorphic picture display and ensure that the TV screen format is set to standard (see the section on TV formats in this Owner’s Guide). • For cropped playback on an older style 4:3 TV, choose the cropped display to remove the top and bottom sections. This setting does not affect recording from analog devices, analog channels, or 4:3 digital channels. Setting Up Analog Recordings with TV Guide On Screen® When setting up a recording using TV Guide On Screen, note that: • You must select the desired recording device in the TV Guide On Screen Record Options menu. • Analog programs can only be recorded to an analog recording device, such as a VCR. • Analog programs cannot be recorded to digital devices such as A/V discs or DVCRs. • The destination recording device for analog programs must be the analog device connected to the TV’s RECORD OUTPUT jacks. Cancel Current Recordings To remove a recording from the record list, use or to highlight the scheduled recording and then press CANCEL. Default Digital (Record) Device If multiple recording devices are available in NetCommand, this setting allows you to choose the device to use when recording digital programs. A digital recording can be made on either a digital or analog device although the quality will not be as good if recorded on an analog device. For best playback quality, record digital programs on a digital recording device. If multiple devices were not connected and then added in the NetCommand setup, this setting will be unavailable (grayed out). Analog recordings can only be made on the one analog device connected to RECORD OUTPUT (usually a VCR) and are not affected by this setting. This feature is most useful when recording from ChannelView™ (page 53) or when set up from TV Guide On Screen...

Otros modelos de este manual:
TV - WD-52627 (5.43 mb)
TV - WD-62627 (5.43 mb)
TV - WD-52627 (5.43 mb)
TV - WD-62627 (5.43 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría