Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
You can use the arrow keys (...) to override the temperature settings, or press the Hold key to prevent any future remote changes. Follow the procedure shown in Programming Mode, to change the programmed DAYand NITEsettings. .. PROGRAMMABLE ENERGY SAVER MODE (PESM) Your thermostat can be configured to allow a remote system to override it. The thermostat sends the temperature to the remote system. The remote system will use the temperature to determine whether or not to override the thermostat based on its own temperature settings. "REMOTE" will be displayed when the remote system has control of the thermostat. You cannot use the arrow keys (...) or any other key on the thermostat to override the remote system. To resume normal operation of your thermostat, you must turn the energy saver feature off at the remote system. 10 SYSTEM MODE Your thermostat can be connected to an automation system or personal computer. With network software, the remote system can send commands to the thermostat to change mode, cool setting, heat setting, status of fan and hold, and other items. "REMOTE" will be displayed when a command is sent from the automation system or personal computer. You can use the arrow keys (...) on the thermostat to change the temperature settings. When the temperature settings are changed at the thermostat, "REMOTE" will no longer be displayed. Press the Hold key to prevent thermostat programs or the remote system from changing temperature settings. "HOLD" will be displayed at the thermostat. • AUTOMATIC TIME UPDATE The thermostat time will automatically be updated by the connected automation system. POWER OUTAGES The thermostat will restart the heating/cooling system 3 to 8 minutes after the electricity comes back on. All settings and programs are stored permanently, and will not be affected by a power outage. CLOCK The thermostat clock is maintained for approximately 25 minutes during an electrical outage. 11 TIME SCHEDULES The table below shows the time schedules that are currently set into your thermostat. There is a blank table at the bottom that can be used to plan changes to the current schedule. WEEKDAYS SATURDAYS SUNDAYS MORN 6:00 AM 8:00 AM 8:00 AM COOL 78 78 78 HEAT 70 70 70 DAY 8:00 AM COOL 85 85 85 HEAT 62 62 62 EVE 6:00 PM COOL 78 78 78 HEAT 70 70 70 NITE 10:00 PM 11:00 PM 10:00 PM COOL 82 82 82 HEAT 62 62 62 WEEKDAYS SATURDAYS SUNDAYS MORN COOL HEAT DAY COOL HEAT EVE COOL HEAT NITE COOL HEAT TWO YEAR LIMITED WARRANTY Home Automation, Inc. (HAI), warrants this product against defects in material and workmanship, under normal use and service, for a period of two (2) years from the date of purchase by the consumer. During the warranty period, HAI will repair or replace, at its option, any HAI thermostat that fails due to defect. This warranty does not cover the cost of removal or reinstallation of any thermostat. This warranty does not cover failure caused by damage to the thermostat while in your possession (other than damage c...
Otros modelos de este manual:Los termostatos - OMNISTAT RC-80BZ (238.14 kb)
Los termostatos - OMNISTAT RC-80BZ (238.14 kb)
Los termostatos - OMNISTAT RC-80BZ (238.14 kb)
Los termostatos - OMNISTAT RC-80B (238.14 kb)