Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
The temperature will update after a few seconds. 4 ¦ During time and day setting mode, the TEMP temperature and program displays will go blank. ¦ Example: Set the Thermostat to the current time of 2:16 pm on Saturday. Refer to the Steps below. STEP 1: day/time ¦ Press to enter time and day setting mode. M The current hour and the AM / PM indica- AM tor will be flashing. ¦ Press to change the Hour up or down to the current hour. Note the AM / PM indicator, as the display will change at 12 AM and 12 PM. STEP 2: day/time ¦ Press again to change from hour setting to minute setting. The current minute will be flashing. ¦ Press to change the Minute up or down to the current minute. M PM (Continued) ® Setting Day and Time (Contined) STEP 3: day/time ¦ Press again to change from minute setting to day setting. The current day will be flashing. ¦ Press to change the Day up or down to the current day. M PM STEP 4: day/time ¦ Press again to change back to the SA normal display. or PM hold 2 /return TEMP NOTE: You may press hold at any time during Day and Time setting to return /return to the normal display. 12 Hr. / 24 Hr. Time Format Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24 hour (military) time, press program at any time while the Hour, Minute, or Day is flashing to toggle between the 12 hour and 24 hour formats. The AM / PM indicator will not be displayed in 24 hour mode. Both the current time and all programs will automatically change to the selected format. PROGRAMMING The following time and temperature settings are pre-programmed into the thermostat: Temperature in C° (F°) Program Number Time Heat Cool 1 6:00 am 68°F (20°C) 78°F (26°C) 2 8:00 am 60°F (16°C) 85°F (29°C) 3 4:00 pm 68°F (20°C) 78°F (26°C) 4 10:00 pm 60°F (16°C) 82°F (28°C) ¦ All 7 days of the week have the same default programs. Personal Program Schedule ¦ You can revise the factory programs to match your own schedule. Use this Personal Program Schedule to determine which times and temperature settings match your comfort and energy saving requirements. Use a pencil so you can revise your records each time you change your program settings. Heating Day Program 1 Program 2 Program 3 Program 4 Monday – Friday Time Temp Time Temp Time Temp Time Temp Saturday – Sunday Time Temp Time Temp Time Temp Time Temp Cooling Day Program 1 Program 2 Program 3 Program 4 Monday – Friday Time Temp Time Temp Time Temp Time Temp Saturday – Sunday Time Temp Time Temp Time Temp Time Temp Revising Programs ¦ Familiarize yourself with manually changing programs, so that you can easily modify the programs as your comfort needs change. Follow the steps below to change the program times and temperatures. NOTE: 1) The program time can be set in 10-minute increments. 2) The program temperature can be set in increments of 1°F (1°C). 3) After 15 seconds without a key press, the thermostat will return to normal display mode. 4) When setting the program time, note the AM / PM indicator. STEP 1: system ¦ Slide the System Switch to the HEAT or SA heat COOL position to program the correspond- off cool ing system. PM NOTE: If the System Switch is in the OFF position, the last position used 2 TEMP will be programmed. STEP 2: program ¦ Press to enter program mode. HEAT or MT WTHF COOL will be displayed on the LCD. AM STEP 3: 1 HEAT ¦ The Program hour and AM or PM indicator are flashing. Press to change the hour. STEP 4: program ¦ Press again to change to the minute posi- MT WTHF tion. The current minute will be flashing. AM ¦ Press to change the minute. 1 HEAT STEP 5: program ¦ Press again to change to the program tem- MT WTHF perature. The current temperature will be AM flashing. ¦ Press to change the temperature. 1 HEAT STEP 6: program ¦ Press again to move to the next program number. ¦ Repeat Steps 3 through 5 to change the remaining Weekday and Weekend programs. (There are a total of 8 programs.) program hold ¦ After cycling through all 8 programs, press again to return the display to normal. ¦ Press at any time to exit the Program Mode. /return Reviewing Programs To review your program settings, press program repeatedly to cycle through the programs. You can also make changes at any time. ® System Selector Switch The System Selector switch on the front of the thermostat determines the operating mode of the thermostat. You may select COOL, OFF, HEAT. NOTE: Anytime you install or remove the thermostat from the wallplate, slide the System Selector to the OFF position to prevent the possibility of a rapid system On-Off. Fan Switch The Fan switch should normally be located in the AUTO position. The Fan will be turned on along with normal operation of your system. In a normal gas or oil furnace, the Fan will be turned on by your furnace after its warm-up delay. For electric heat, air conditioning, and heat pump operation, the Fan will turn on with the system. To run the Fan on continuously, slide the Fan switch to the ON position. system hea...
Otros modelos de este manual:Los termostatos - 44110 (295.6 kb)
Los termostatos - 44110 (295.6 kb)