Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario LifeWise, modelo 63-609

Fabricar: LifeWise
Tamaño del archivo: 60.18 kb
Nombre del archivo: 6300609_PM_EN.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Thank you for purchasing a LifeWise Pulse Monitor Watch. Your pulse meter all in one convenient system, so it’s easy to use, wherever you go! Large Liquid Crystal Display — shows you large, easy-to-read digits. START/STOP/AL — press to start or stop the stopwatch or view the alarm. SET/RESET — press to select or reset a setting. Alarm — sounds at the time you set. MODE — press to switch between the clock, stopwatch, and countdown timer. Stopwatch — lets you time events up to 100 minutes in length. watch combines a clock, a stopwatch, a countdown timer, and a Time/Day Display — shows the time in a 12- or 24-hour format and the day of the week. SENSOR — gently hold your finger against the sensor to take your pulse. Pulse Meter — detects your pulse rate when you place your fingertip on the pulse sensor. PULSE — press to activate the pulse meter. Preset Countdown Timer — counts down from a specific time limit (3, 4, 5, 10, 15, 30, 60, or 90 minutes). Your watch’s display is covered by a protective film. Be sure to remove it before using your watch. O NOTE O • While setting the time and day, if you do not press any button within about 10 seconds, the watch returns to the current time display. • The watch shows the time in a 12-hour or a 24-hour time format. If you use the 12-hour format, P appears at the left of the display for PM hours. SETTING THE TIME AND DAY 1. Repeatedly press MODE until the time appears. 2. Hold down SET/RESET. The hour digits flash. O 3. Repeatedly press, or hold down, START/ STOP/AL to set the correct hour. 4. Press SET/RESET to store the hour. The minute digits flash. Repeat Steps 3 and 4 to set the minute, day of the week, and time format. After setting the time format, the current time and day of the week appear. O SETTING THE ALARM TIME 1. Repeatedly press MODE until the current time appears. 2. Hold down START/STOP/AL. 12:00 (in 12hour format), or 0:00 (in 24-hour format), or the last set alarm time appears. The watch beeps once. The alarm is turned on and d appears. 3. While holding down START/STOP/AL, press SET/RESET once. The hour digits flash. 4. Repeatedly press, or hold down, START/ STOP/AL to set the alarm hour. 5. Press SET/RESET to store the hour. The minute digits flash. 6. Repeat Steps 4 and 5 to set the minute. After completing setup, the current time appears. 7. To view the set alarm time, press START/ STOP/AL. d and the preset alarm time appear. At the set time, the watch sounds an alarm for about one minute. Press any button to silence the alarm before it automatically turns off. The alarm sounds again the next day at the same time. TURNING THE ALARMS ON/OFF To turn the alarm on or off any time, hold down START/STOP/AL. d appears when the alarm is on and disappears when the alarm is off. ! IMPORTANT ! © 2003 RadioShack Corporation. All Rights Reserved. If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for RadioShack and RadioShack.com are trademarks pertinent information. used by RadioShack Corporation. o o — Warning ! — Important O — Note O NOTE O Using the Stopwatch • When the stopwatch is running, press START/STOP/AL then SET/RESET to reset it to 00:00. • While the stopwatch is running, press MODE to use the watch’s other features. Using the Countdown Timer • To reset the countdown timer when it is running, press START/STOP/AL to stop counting then repeatedly press SET/RESET until the selected countdown time limit appears. • To reset the countdown timer when it is not running and the display is not set to the preset time limit, repeatedly press SET/ RESET until the selected countdown time limit appears. Using the Pulse Meter • Do not press your finger tightly against the sensor. • If your fingers are cold or heavily calloused, the pulse meter cannot take an accurate reading. . and Err appear. • The sensor’s range is from 40 to 199 beats per minute (bpm). If your heart rate is over 199 bpm, the meter only shows up to 199 bpm. o o WARNING o • Keep button-cell batteries away from children. Swallowing a button-cell battery can be fatal. • Always dispose of batteries promptly and properly. Do not burn or bury them. Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDI...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría